Setting the Date and Time
When the camera is first turned on, the date and time setting will not be correct. So before using, be sure to set date and time.
1.Press the MENU button, using or to select SETUP () and press the SET button.
2.Press or to select DATE & TIME () then press or the SET button to launch the Date & Time screen.
3.Press or to change the value of the highlighted field. Press or to highlight another field.
4.After adjusting the settings, press the SET button to apply the setting.
NOTE:
yIf you hold down or , you can change the value quickly.
yIf the batteries are removed for about 48 hours, the Date & Time setting will be lost. In this case, make these settings again.
- 13 -