Appendix
Troubleshooting
| Problem |
| Cause | Solution |
| Power does not turn on. |
| Battery is inserted in the | Reload battery in the correct |
|
|
| wrong direction. | direction. |
|
|
| Batteries are dead. | Replace or recharge batteries. |
|
|
| The battery compartment | Make sure the battery |
|
|
| door is open. | compartment door is securely |
|
|
|
| closed. |
| The camera does not take |
| The flash is charging. | Wait for the flash to charge. |
| pictures. |
| Memory is full. | Insert a new memory card. |
|
|
| Memory card is not | The card may be detective, use a |
|
|
| formatted correctly. | new card. |
| Image is not recorded when |
| The Flash is charge. | Wait for the flash to charge. |
| the shutter button is |
| Memory is full. | Insert a new memory card. |
| pressed. |
|
|
|
| The flash does not fire |
| Flash is set to OFF. | Set the flash to any mode except |
|
|
|
| off. |
| Image is blurry or out of |
| The camera was moving | Hold the camera steady when |
| focus. |
| when the image was | shooting picture. |
|
|
| captured. |
|
|
|
| The subject was beyond the | Turn the Macro mode on it the |
|
|
| range within which the | subject is within 10 cm (zoom out) |
|
|
| camera can focus. | or 80 cm (zoom in). |
|
|
|
| Do not use Macro mode when |
|
|
|
| shooting distant subjects. |
| Image is not displayed on |
| A memory card with | This camera cannot display |
| the LCD monitor. |
| ||
|
|
| with other camera) is |
|
|
|
| loaded. |
|
| Recorded images are not |
| The camera was turned | If the battery low indicator appears |
| saved in memory. |
| off/powered down before the | on the LCD monitor, replace the |
|
|
| image was stored in | battery immediately. |
|
|
| memory |
|
| Cannot transfer images to a |
| USB driver is not installed. | Install the USB driver before you |
| computer after connecting |
|
| connect the camera to a computer |
| the USB cable. |
|
| / turn the camera on. |
|
|
|
|
|
- 47 -