Pelco CC3700S-2X Switch Settings, Switch position, Synchronization LL/INT Switch Switch Setting

Page 12

SWITCH SETTINGS

- + - +

PHASE LEVEL

NOR OFF AIV

INT ESC ESC BLC

OFF

LIN

8

 

 

AGC

 

7

NOTE: White represents

 

AID

6

 

switch position.

LL5

SHT

4

OFF

3

OFF

2

FLK

1

Figure 7. Switch Settings (Defaults)

NOTE: Under most conditions, no setting of switches will be required. Please read the details of each switch before making any adjustments.

Gamma (NOR/LIN Switch) - Switch Setting 8 Sets the Gamma level to one of the following:

NOR (Default setting) - Increases visibility in dark areas of the picture. LIN - Linear response increases (overall) contrast.

Automatic Gain Control (AGC/Off Switch) - Switch Setting 7 Automatically adjusts the image to compensate for changes in light levels when us- ing fixed or manual iris lenses. Following are the AGC switch settings:

ON (Default setting) - Enables the AGC mode. OFF - Disables the AGC mode.

Lens Mode Selector (AIV/AID Switch) - Switch Setting 6 The AIV/AID switch setting is determined by the type of lens used:

AIV - Video drive auto iris lens.

AID (Default setting) - Direct drive lens.

Synchronization (LL/INT Switch) - Switch Setting 5

Locks the frame rate to the power supply frequency. Eliminates vertical roll caused by multiple cameras connected to the same switching device. Each camera output is synchronized to the frequency of the power supply. Set the camera synchronization mode to one of the following:

Line Lock (LL) (Default setting) - Line-locks frame rate of cameras. Internal (INT) - Disables line lock (use with DC power or noisy AC power).

8 NOR

8 LIN

7

 

 

AGC ON

 

 

7

 

 

AGC OFF

 

 

6 AIV

6 AID

5

 

 

LL

 

 

5

 

 

INT

 

 

[ 12 ] Pelco Manual C1986M-B (11/03)

Image 12
Contents Installation/Operation Pelco Manual C1986M-B 11/03 Contents Important Safeguards and Warnings AID/AIV Lens ConnectorDescription Regulatory NoticesInstallation Camera LayoutCamera Mounting Power and Video Connections 12 VDCTable A. Recommended Wire Gauge and Wiring Distances Wire Gauge Total2880 Cable Type Maximum DistanceLens Setup and Focus Procedures Back Focus Adjustment Back Focus AdjustmentSwitch Settings Switch positionSynchronization LL/INT Switch Switch Setting Shutter Speed Selection Switch Settings 4, 3, 2, BLC Backlight Compensation Switch Settings 4, 2,Camera Synchronization Specifications Lens Jack Pin connector miniature squarePhysical Dimensions Weight without lens 77 lb 0.35 kgWarranty and Return Information Warranty

CC3700S-2X, CC3700H-2X, CC3700H-2 specifications

Pelco's CC3700H-2, CC3700H-2X, and CC3700S-2X are sophisticated cameras that embody the cutting-edge of surveillance technology, designed to meet the varying needs of modern security applications. Each model features robust specifications that cater to both indoor and outdoor installations, making them versatile tools for enhancing safety and security.

The CC3700H-2 model is a high-definition fixed camera that supports 1080p resolution, ensuring that users receive crisp and clear imagery. It utilizes advanced imaging technology, including a 1/3" progressive scan CMOS sensor, which allows for better light sensitivity and reduced noise in low-light conditions. This model is equipped with a wide dynamic range (WDR), which balances brightness and contrast in challenging lighting situations, enabling it to capture details in both bright and dark areas simultaneously.

The CC3700H-2X is an enhanced version of the CC3700H-2, featuring the same image quality enhancements but with the addition of intelligent video analytics. This model includes functionalities such as motion detection, line crossing, and intrusion detection, providing users with actionable alerts and minimizing the need for constant monitoring. With its built-in analytics, the CC3700H-2X can help organizations streamline their surveillance efforts and improve response times.

Meanwhile, the CC3700S-2X represents a more specialized option, designed for installations requiring seamless integration with various Pelco systems. It offers dual-stream functionality, allowing users to stream high-definition video simultaneously to different destinations or applications. This ensures that the camera can serve both real-time monitoring and recording with optimal bandwidth management.

All three models are equipped with Pelco's Smart Compression technology, which effectively reduces the storage requirements without compromising video quality. They also feature IP66-rated weatherproof housing, ensuring durability against harsh environmental conditions while maintaining operational reliability.

In summary, the Pelco CC3700 series combines high-definition imaging, advanced analytics, and robust construction, making it an excellent choice for businesses and organizations looking to enhance their security systems. Whether opting for the standard model or one enhanced with analytics capabilities, users can expect dependable performance and superior image quality that precisely meets their surveillance needs.