Pelco CC3700S-2X, CC3700H-2X manual Camera Layout, Installation

Page 6

CAMERA LAYOUT

BACK FOCUS

 

ADJUSTMENT

MOUNT ADAPTER

LOCKING

SCREW

PHASE ADJUSTMENT

 

LENS LEVEL ADJUSTMENT

 

POWER CONNECTOR

 

COSMETIC TRIM

 

RING

BACK FOCUS

ADJUSTMENT

RING

BNC VIDEO CONNECTOR

LED

LENS CONNECTOR

DIP SWITCHES (COVER REMOVED)

Figure 1. Camera Layout

NOTE: The cosmetic trim ring conceals the LED light for more discreet surveillance operations. The trim ring also hides the power connectors and protects the DIP switches.

INSTALLATION

Lens Mounting

The CC3700 Series camera can use fixed iris, manual iris, auto iris, or direct drive lenses. Cameras are factory- set for CS-mount lenses, but easily adjust for C-mount lenses.

1.C-Mount Lens Only - Loosen the two back focus locking screws. Rotate the back focus adjustment ring fully counterclockwise before installing the C-mount lens (refer to the section on Back Focus Adjustment).

2.Remove the cosmetic trim ring from the back of the camera (refer to Figure 1). Set the lens mode selector switch on the side of the camera to AIV (auto iris video drive lens) or AID (auto iris DC drive lens). Refer to the Switch Settings section. Switch setting is determined by the type of lens used.

3.Screw the lens onto the lens mount. Be careful to prevent dust from entering the space between the lens and the CCD element. If necessary, use clean, compressed air to remove any foreign matter.

4.Thread the lens cable through the cosmetic trim ring.

5.Connect the auto iris lens to the 4-pin iris drive connector located on the side of the camera. Pin connections for the iris drive connector are as follows.

[ 6 ] Pelco Manual C1986M-B (11/03)

Image 6
Contents Installation/Operation Pelco Manual C1986M-B 11/03 Contents Important Safeguards and Warnings AID/AIV Lens ConnectorDescription Regulatory NoticesInstallation Camera LayoutCamera Mounting Power and Video Connections 12 VDC2880 Table A. Recommended Wire Gauge and Wiring DistancesWire Gauge Total Cable Type Maximum DistanceLens Setup and Focus Procedures Back Focus Adjustment Back Focus AdjustmentSwitch Settings Switch positionSynchronization LL/INT Switch Switch Setting Shutter Speed Selection Switch Settings 4, 3, 2, BLC Backlight Compensation Switch Settings 4, 2,Camera Synchronization Physical Dimensions SpecificationsLens Jack Pin connector miniature square Weight without lens 77 lb 0.35 kgWarranty and Return Information Warranty

CC3700S-2X, CC3700H-2X, CC3700H-2 specifications

Pelco's CC3700H-2, CC3700H-2X, and CC3700S-2X are sophisticated cameras that embody the cutting-edge of surveillance technology, designed to meet the varying needs of modern security applications. Each model features robust specifications that cater to both indoor and outdoor installations, making them versatile tools for enhancing safety and security.

The CC3700H-2 model is a high-definition fixed camera that supports 1080p resolution, ensuring that users receive crisp and clear imagery. It utilizes advanced imaging technology, including a 1/3" progressive scan CMOS sensor, which allows for better light sensitivity and reduced noise in low-light conditions. This model is equipped with a wide dynamic range (WDR), which balances brightness and contrast in challenging lighting situations, enabling it to capture details in both bright and dark areas simultaneously.

The CC3700H-2X is an enhanced version of the CC3700H-2, featuring the same image quality enhancements but with the addition of intelligent video analytics. This model includes functionalities such as motion detection, line crossing, and intrusion detection, providing users with actionable alerts and minimizing the need for constant monitoring. With its built-in analytics, the CC3700H-2X can help organizations streamline their surveillance efforts and improve response times.

Meanwhile, the CC3700S-2X represents a more specialized option, designed for installations requiring seamless integration with various Pelco systems. It offers dual-stream functionality, allowing users to stream high-definition video simultaneously to different destinations or applications. This ensures that the camera can serve both real-time monitoring and recording with optimal bandwidth management.

All three models are equipped with Pelco's Smart Compression technology, which effectively reduces the storage requirements without compromising video quality. They also feature IP66-rated weatherproof housing, ensuring durability against harsh environmental conditions while maintaining operational reliability.

In summary, the Pelco CC3700 series combines high-definition imaging, advanced analytics, and robust construction, making it an excellent choice for businesses and organizations looking to enhance their security systems. Whether opting for the standard model or one enhanced with analytics capabilities, users can expect dependable performance and superior image quality that precisely meets their surveillance needs.