ViewCast manual Niagara 2120 Menu Bar Commands, ∙ Niagara 2120 Properties View details on

Niagara 2120 User Guide

Niagara 2120 Menu Bar Commands

The home page menu bar (Figure 4) allows you to use the commands described in Table 5.

Figure 4. Menu Bar

		Table 5. Menu Bar Commands
Menu	Command	Function
Home		∙ View general administrative information about the
		ViewCast Niagara 2120.
Encoders		∙ All Encoders – View the encoder profiles available
		to start on the encoder box.
		∙ Active Group – Allows you set the one group that
		you assign to the front panel Stream button.
		∙ Groups – Assign groups and encoders to that group.
Configuration		∙ Niagara 2120 Properties – View details on the
		Machine Properties of the Niagara 2120 including
		the Network Name, Serial Number, and all software
		versions installed.
		∙ Alerts – Modify the settings for each application
		alert Niagara 2120 can generate during normal
		operations.
		∙ Network Properties – View information on Niagara
		2120 network properties and addresses for both
		NIC ports and modify these properties.
		∙ System Configuration – Modify the system
		configuration including setup for email alerts from
		Niagara 2120 whenever it encounters an operation
		error.
Status		∙ View Activity Log – View all Niagara 2120 activities
		including the time and date for each event.
		∙ View Alerts – View all alerts including the time and
		date for each alert.
Log Out		∙ Allows users to log off the system’s Web interface.

ViewCast 17