ViewCast 2120 manual Configuring Default Directory Setting, Setting the High Temperature Alert

Appendix: Advanced Settings for H.264

Configuring Default Directory Setting

The Niagara 2120 stores AV files when you click the Save to File option in the encoder profile in the Default AV folder. Refer to the Save to File option under the Flash Encoder Properties (Figure 46) sections for information on setting an encoder profile to create an AV file.

NOTE: ViewCast strongly recommends you do not alter the default directory setting unless you understand the risk of saving your files to a directory not located on the D: drive. If you save your files to another drive on the Niagara 2120, the system could delete the files when you use the Restore to Niagara 2120 Factory Defaults feature.

Only drive D on the Niagara 2120 has available storage to save your files. This drive has approximately 105 Gigabytes of storage capacity.

Use drives C, E, and F strictly for the Niagara 2120 operational programs. Any modifications to these drives can permanently damage your system and void your warranty.

Figure 46. Default AV Folder Field

Setting the High Temperature Alert

The Alert Configuration links to the Niagara 2120 Alerts window (Figure 47). Refer to pertinent previous sections in this user guide for information on setting the Niagara 2120 Alerts.

Figure 47. High Temperature Alert

You can enable an alert if the Niagara 2120 reaches a predefined maximum temperature level. To set the temperature level, click an option from the drop-down menu (Figure 48).

58 ViewCast