(a)To start adjustment, push the “FUNC” button. The menu will appear on the monitor . (See page 12)
(b)Use “UP” or “DOWN” buttons to choose functions. To select function, press the “FUNC” button.
(c)After selecting the function, press “UP” or “DOWN” buttons to choose mode. To select mode, press the “FUNC” button.
(d)To use One Push White Balance.
Go to the next function if needed, and repeat (b) to (c).
1.Change to White Balance mode by Function SW.
2.Change to
3.Push Function SW and make it READY.
4.Push Up SW, and
5.Push Function SW to save the data (R.B.Gain) of
If you turn off the power without saving the data, it will return to the original status.
5-3. RS 232C functions
a) | White balance | : | To adjust the color temperature |
b) | Electronic shutter | : | To adjust the shutter speed |
c) | Auto gain control | : | OFF, +12dB, +24dB, manual selectable |
d) | Back light compensation : | To create your own BLC pattern. | |
e) | Iris level | : | To adjust the video level |
f ) | Gamma | : | 0.45, 0.60, 1.0 selectable |
g) | Scanning reversal | : | To select the scanning direction |
h) | Frame integration | : | To select the sensivity |
11