JAI CV-S3300 Functions and operations, Video connector, Lens connector, Direct drive mode Passive

Page 6

CV-S3200/3300

4-2. S-VIDEO connector

1 : Ground

2 : Ground

3 : Y output

4 : C output

1: +9V / Damp-

2: NC / Damp+

3: Iris / Drive+

4: Ground / Drive-

This switch is to select the type of auto iris. It is located on the CCD board (PK8167), as below.

Up	:	Direct drive mode (Passive)
Down	:	Video controlled (Active)

SW1 switch

Note : Factory pre-set is Video controlled.

Image 6

Contents CV-S3200/3300 Declaration of Conformity Table of Contents Main Features GeneralPin assignment DC IN/SYNC/RS-232C connectorStandard compositions UNC ThreadSW1 switch on PK8167 board Video connectorLens connector Direct drive mode PassiveOn-screen-menu Functions60 sec. NTSC, 1/50 sec. PAL 60 sec. to 1/10000 sec. NTSC, 1/50 sec. to 1/10,000 sec.PALPatten Reversal scanning White balance ManualRS 232C functions OFF, +12dB, +24dB, manual selectableExternal appearance Pecifications VideoGainWhiteGammaoutputbalanceAppendix User’s Record 2700-21107 E B1