JAI CV-S3300, CV-S3200 operation manual General, Main Features

Page 4

CV-S3200/3300

1. General

The CV-S3200/3300 is a new high-resolution color camera series, available in PAL or NTSC format. The camera series was developed with JAI's new DSP processor, which has remarkable high signal to noise ratio as well as a high bit flow. The cameras also have built-in RAM, which together with the DSP enables the camera to produce field integration with 100% horizontal resolution.

The CV-S3200/3300 series features EXview HADTM sensors (CV-S3200:1/2" and CV-S3300: 1/3")which are extra light sensitive and have enhanced anti-smear and blooming characteristics.

The cameras run on 12V DC and can be gen-locked or use VBS for external synchronization. There are connections for video control or direct drive lens, and VBS and Y/C video outputs. Both cameras have CS/C-mount with a variable mounting ring for back focus. The CV-S3300 has screw terminals for power, gen-lock and line-lock. The CV-S3200 comes with D-sub connector.

The camera set-up can be performed via the JAI software platform and an RS232C port, or from a new on-screen menu that can be controlled by the three buttons mounted on the rear of the camera. Both the software and the on-screen-menu can control the following setting:shutter, integration, gamma, AGC,H/V enhancer, iris-level for direct drive, positive/negative picture, back-light compensation, and AWB fixed or manual color temperature.

Applications include surveillance, security, medical and a large variety of other industrial applications.

2. Main Features

1/2" EXview HADTM IT color CCD sensor for CV-S3200, 1/3" EXview HADTM IT color CCD sensor for CV-S3300

NTSC : 768 (h) x 494 (v) , PAL : 752 (h) x 582 (v)

450 TV lines horizontal resolution Composite VBS and Y/C output Excellent color reproduction

Field integration mode for higher sensitivity

S/N ratio > 50 dB

White balance automatic or manual

Auto iris and CCD iris for light regulation

Manual shutter up to 1/10,000 sec.

Scanning reversal function (mirror-effect mode)

CS-lens mount with focus adjustment

CV-S3200 employs 9 pin Dsub connector at camera rear panel for single cable solution. CV-S3300 provides 7 pin terminal at camera rear panel for easy cable installation.

4

Image 4
Contents CV-S3200/3300 Declaration of Conformity Table of Contents Main Features GeneralDC IN/SYNC/RS-232C connector Standard compositionsPin assignment UNC ThreadVideo connector Lens connectorSW1 switch on PK8167 board Direct drive mode PassiveOn-screen-menu Functions60 sec. NTSC, 1/50 sec. PAL 60 sec. to 1/10000 sec. NTSC, 1/50 sec. to 1/10,000 sec.PALPatten Reversal scanning White balance ManualRS 232C functions OFF, +12dB, +24dB, manual selectableExternal appearance Pecifications VideoGainWhiteGammaoutputbalanceAppendix User’s Record 2700-21107 E B1