NAD NAD 911 owner manual No Sound ONE Channel, No Line Level Insert Signal

Page 10

GB

TROUBLESHOOTING.

NO SOUND.

AC cord unplugged or power not switched on. Output lead not properly connected or damaged.

Amplifier not switched on, level controls too low or amplifier faulty.

Speakers not properly connected or damaged Internal fuse blown

Check AC socket, lead and fuse if fitted. Check the connections at both ends (NAD-911 and power amplifier).

Check amplifier, connections and settings

Check connections and speakers.

Consult dealer

NO SOUND ONE CHANNEL.

Level controls set too low.

Adjust level control.

Wrong channel being adjusted.

Check all channel level controls

NO LINE LEVEL INSERT SIGNAL.

Microphone connected.

Disconnect microphone

Input leads not properly connected or damaged

Check connections.

Source system not producing signal.

Check output of source system.

NO MICROPHONE SIGNAL OR FEEDBACK.

Microphone leads not properly connected or damaged

Check connections.

Microphone not switched on.

Switch microphone on or to ‘Talk’

Microphone battery flat.

Check or replace microphone battery if used.

Microphone requires ‘phantom’ powering.

Consult your microphone supplier for a suitable

 

adapter.

Loud High Pitch sound when the Microphone is switched on. Feedback caused by the microphone being too close to a speaker. Move the speaker or micro phone position or use the configuration jumpers to disable the Insert

Feed to that particular speaker.

NAD

10

Image 10
Contents NAD Important Safety Instructions Rear Panel Connections Front Panel Controls Rear Panel Connections MIC CleaningIntroduction to the NAD-911 DIS- Tribution Preamplifier Important InformationMicrophone Front Panel ControlsChannels 1 CablesBasic Connection and Operation Using Several NAD-911s TAMPER-PROOF CoversConfiguring the NAD-911 Internal Jumpers SERVICING, Installation and CON- Figuration IntructionsLevels Configuration Settings No Sound No Line Level Insert SignalNo Microphone Signal or Feedback No Sound ONE ChannelInformations Importantes Branchements SUR LE Panneau ArriereCommandes SUR LA Face PAR- Lante Connexion ET Fonctionnement DE Base CablesBranchement DES Entrees Interconnexion DES VoiesFonctionnement DE Base Couvercles ANTI-DEREGLAGE Configuration DES Cavaliers Internes DU NAD-911 Configuration Utilisee Tion Variable INS VariableRecherche DES Pannes Reinigung Wichtige InformationRückwandverbindungen MICKanäle Bedienung AN DER GerätefrontMikrofon DIE Verbindung VON Kanälen KabelVerbindung DER Eingänge Verbindung DER OUTPUT-BUCHSENEinstellung DER Mikrofonlautstärke DIE Verteilung DES Insert Signals AN Alle KanäleDIE Verteilung DES Insert Signals AN Bestimmte Kanäle Allgemeine BedienungEinstellungsschutzabdeckungen Konfiguration DER Internen NAD-911 Jumpereinstellung SERVICE, Installation UND BedienungsanweisungenInsert Systemkonfiguration Konfiguration DER MIKROFON- UND MusikeinstellungenAusschaltung DES MIKROFONEIN- Satzes AUF Einem Kanal Verbindung VON Mikrofon UND EingangslautstärkeKonfiguration DER Einstellungen Fehlerbehebung NAD 911 Technical Specifications THD+NNAD Electronics

NAD 911 specifications

The NAD NAD 911 is a significant addition to the realm of audio amplification, showcasing the brand's commitment to producing high-quality audio equipment. This model has garnered attention due to its refined sound reproduction capabilities, which appeal to both audiophiles and casual listeners alike.

At the core of the NAD 911 is its powerful amplification system, featuring a robust power output that suits a wide range of speaker configurations. With a clean and dynamic sound, this amplifier is designed to handle everything from delicate classical music to intense rock anthems, providing a rich auditory experience. The specifications boast an impressive wattage per channel, ensuring that listeners can enjoy their favorite tracks at satisfying volumes without distortion.

One of the standout technologies integrated into the NAD 911 is its proprietary PowerDrive technology. This feature optimizes power delivery to the speakers, adapting the amplifier's output to the demands of the connected load. It allows the NAD 911 to maintain high performance, delivering maximum output when required while providing a smooth and controlled sound even at high volumes.

In addition to its amplification prowess, the NAD 911 is designed with user convenience in mind. The amplifier includes a well-thought-out input selection process, offering multiple inputs to accommodate various audio sources. This makes it easy for users to connect their CD players, turntables, and streaming devices. With a simple and intuitive layout, the NAD 911 is accessible even for those who may not be tech-savvy.

The build quality of the NAD 911 reflects the brand's longstanding reputation for durability and reliability. The chassis is crafted from high-grade materials, ensuring that the amplifier can withstand the rigors of daily use while maintaining its performance integrity.

Moreover, the NAD 911 features advanced heat dissipation mechanisms, which help it operate efficiently without overheating. This not only prolongs the lifespan of the components but also contributes to the overall sound quality by minimizing interference.

Overall, the NAD NAD 911 strikes a fine balance between performance, versatility, and user-friendly design. It embodies the essence of NAD’s commitment to delivering high-fidelity sound experiences, making it an ideal choice for anyone looking to enhance their home audio setup. With its blend of innovative technology and classic audio engineering, the NAD 911 is set to leave a lasting impression in the audio community.