camera, fix the screw on the front fixing plate. Make sure the wider side of the fixing plate holds the edge of the camera well.
5.Attach the camera onto the mounting bracket.
6.Loosen the swivel screw and point the camera to the desired direction.
7.Tighten the swivel screw. To strengthen the fixing power of the swivel screw, tighten the
Notes:
(A)Make wiring connections only when it is determined that power is in a disconnected status.
(B)There is a desiccant pack attached to the housing base under the camera which is designed to absorb any moisture trapped inside the housing during adjustment. To avoid excessive moisture build up, it is recommended to avoid rainy or excessively damp conditions during installation of camera. It is also advisable to limit the frequency of removing the housing cover. The desiccant pack can be replaced if condensation develops inside the housing.
5