SETTINGS
The camera is set up at factory and normally requires no adjustments. However, adjustments may be necessary in some cases. Please refer to the following description for the function details.
The IRIS ALC and IRIS Level adjustments are located on the side circuit board, use a screwdriver to adjust if it is necessary.
IRIS Level | IRIS ALC |
Adjustment | Adjustment |
DIP Switch
IRIS Level Adjustment
To adjust iris level –
Turn the IRIS Level Adjustment VR counterclockwise to get darker picture. Turn the IRIS level adjustment VR clockwise to get brighter picture.
IRIS ALC Adjustment
To select light metering method –
Turn the IRIS ALC Adjustment VR counterclockwise for Average Metering. Turn the IRIS ALC Adjustment VR clockwise for Peak Metering.
6