EverFocus EDN800 user manual

Page 30

EDN800

or button to move between events. The event that has

highest priority will be activated first.

Press Apply to apply the setting changes or Reset to reset without saving the change.

This example describes how to set the camera to upload images to FTP when someone press Manual trigger button:

1.Click button in Event page.

2.Enter an event name for the event, e.g. Event 1

3.Select “Manual Trigger” as event type.

4.Select “Upload to FTP” as action type.

5.Check “Enable Pre-alarm Buffer” and “Enable Post-alarm Buffer”. For pre-and

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents
EDN800 User’s Manual Page Safety Notice About this documentTerms and Trademark SupportTable of Contents Introduction Operation Window EDN800 EDN800 Setting EDN800 Information 2 LogUser Config EDN800 EDN800 Network IP TypeSubnet Mask PasswordIP address GatewayHttp Port DdnsBandwidth SMTP/FTP EDN800 EDN800 EDN800 Network Alarm reserved for PowerCon Video Multi StreamingEDN800 Image setting EDN800 CameraEDN800 User Event EDN800 Event EDN800 Motion Alarm Time Mask System EDN800 Date/Time EDN800 EDN800 Daylight Saving SD Card Indication Description EDN800 Maintenance BrowseEDN800 Specifications China Office Head OfficeUSA L.A. Office USA N.Y. Office Europe Office Japan Office