EverFocus EHD350 specifications DIP Switch Function, Vari-Focal Lens LL Line-Lock OFF/ON

Page 10

DIP SWITCH FUNCTION

Vari-Focal Lens

LL (Line-Lock) OFF/ON

To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on).

Set the line-lock off, the camera will synchronize to the internal time base. Set the line-lock ON, the camera’s vertical synchronization can be driven by the AC signal in the power lines.

Note: Line-Lock sync mode operation is possible only when used with an AC power source; it is not possible with a DC power source.

The default setting is OFF.

AGC (Automatic Gain Control) OFF/ON

AGC ON: The sensitivity increases automatically when light is low.

AGC OFF: A-low-noise picture is obtained under a low light condition.

The default setting is ON.

9

Image 10
Contents Precautions Do not install the camera near electric or magnetic fieldsPackage Contents FeaturesPreface Specifications 12VDC/24VACDimensions Installation Page Page Page Wire Connection Termination Board Page Vari-Focal Lens LL Line-Lock OFF/ON DIP Switch FunctionAGC Automatic Gain Control OFF/ON BLC Back Light Compensation ON/OFF Iris Level AdjustmentIris ALC Adjustment FL Flickerless Function ON/OFFSimple Instructions for the Desiccant Pack China Office Head OfficeUSA L.A. Office USA N.Y. Office Europe Office Japan Office