EverFocus EHD350 specifications

2. Remove the camera.

Vari-Focal Lens

Heater

Locking Screws

Figure 3

To remove the camera, first unplug the wire connection on the back of the camera. Then loosen the 2 locking screws on the camera base, push the camera base to the right (toward heater direction, as shown in Figure 3), remove the camera from the mounting base. Reinstall the camera and the cable while the base mounting is completed.

3. Mounting the base.

Side conduit entry

Conduit plug setscrew

Back conduit entry

Mounting Setscrew

Mounting Setscrew

Mounting Setscrew	Mounting Setscrew
	Figure 4

4