EverFocus EM500NH P3, EM500NH P2 Secure camera mounting bracket to mounting surface, Power input

Page 6

(3)Power/video port.

(4)Power/video connector to be plugged into the camera.

(5)Video Output BNC Connector

BNC 1.0Vp-p, 75ohm. Use the connector to connect with the video in connector of a monitor.

(6) Power input

Use the connector to connect with 12VDC power adaptor.

This section covers detailed steps of the simple installation. Please follow instructions for preventing any unnecessary damage

a.Mark 2 screw points in mounting surface.

Figure 1-1

b.Fix the bracket to the mounting service with included screws. see figure 1-1.

Image 6

Contents Precautions Do not install the camera near electric or magnetic fieldsFeatures Package ContentsSpecifications NtscDimensions CameraBracket Camera Major Parts Functions LensScrew holes for included mounting bracket Power input Secure camera mounting bracket to mounting surfaceFix camera to mounting Bracket Pigtail Polarity Important since DC voltage is used Troubleshooting No powerPicture output is horizontal China Office Head OfficeUSA California Office USA New York Office Europe Office Japan Office