6
EN
QUICK OPERATION GUIDE
CASSETTE COVER
CASSETTE HOLDER
OPEN/EJECT SWITCH
BATTERY COVER
STANDBY
PAUSE
POWER LAMP
PLAY | OFF | REC |
|
5S
REC
RECORDING
START/STOP BUTTON
SUPPLYING POWER
Install A Fully Charged Battery
1 Open the battery cover in the direction of the arrow.
2 Remove the battery’s protective cap and insert the battery + – first.
3 Close the battery cover.
LOADING A CASSETTE
1 Turn on the power, then slide the OPEN/EJECT switch in the direction of the arrow. The cassette cover releases. Open the cover in the direction of the arrow until it locks. The holder opens automatically.
2 Insert a tape.
3 Close the holder and it recedes automatically.
4 Close the cassette cover.
RECORDING
1 Pull out the viewfinder and align the mark with “STANDBY”. The lens cover opens automatically.
2 Set the Power Dial to “REC”, then press RECORDING START/STOP. A “beep” signals the start of recording.
3 To pause during recording, press RECORDING START/STOP. Two beeps indicate the RECORD/STANDBY mode.
4 When you’re finished, push the viewfinder in, aligning its mark with “CAMERA OFF”.
PLAYBACK
1
2 Set the Power Dial to “PLAY”.
3 Slide open the camcorder’s Operation Panel cover.
4 Press REW to rewind the tape to the beginning.
5 Press PLAY and watch what you’ve recorded in the viewfinder.
6
