EN 47
Playback Sound
During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. (48 kHz is preset to “FULL SOUND” and 32 kHz is preset to “SOUND 1”.)
RECORDING SOUND | DISPLAY | OUTPUT SOUND |
48 kHz | FULL SOUND | Stereo sound |
|
|
|
| SOUND 1 | “L” sound is output on both channels |
| SOUND 2 | “R” sound is output on both channels |
32 kHz | FULL SOUND |
|
| SOUND 1 | Stereo sound |
| SOUND 2 |
|
|
|
|
When watching a tape recorded at 48 kHz, if you want to change the output sound, access the Playback Menu and, in step 3 on page 46, select “48kHz MODE” and set it for “FULL SOUND”, “SOUND 1” or “SOUND 2”. When playing back a tape recorded at 32kHz, set in the same manner. For information on output sound during Audio Dubbing, see page 57.
NOTES:
●You can also use the
●During playback, the camcorder detects the sound mode in which the recording was made. This detection cannot be made during
VIEWFINDER
|
|
|
| MINUTES |
|
|
|
|
|
| |
|
|
|
| SECONDS | 25. 12. 97 |
|
|
|
| ||
|
|
|
|
| |
12 : 34 : 24 |
| FRAMES* | 10 : 35 | ||
| |||||
*25 frames = 1 second
Displaying The Time Code During Playback
You can display the Time Code on screen during playback. This is especially useful for editing. This function is preset to “OFF”. To turn it on, select “TIME CODE” at the Playback Menu and change the setting.
ON– The Time Code is displayed on the playback screen.
OFF– The Time Code doesn’t appear.
Displaying the Date During Playback
If the time has been set, the date is automatically recorded separately from the recorded video signal. You can display or remove the date anytime during playback. This function is preset to “ON”. To turn it off, select “DISPLAY” at the Playback Menu and change the setting.
ON– The date is displayed on the playback screen. OFF– The date is not displayed, or is removed.
