42
EN 
PLAYBA
CK Basic Connections
POWER DIAL
RELEASE BUTTON
TO DC INPUT JACK
AC POWER ADAPTER/CHARGER
To AC outlet
LOCK LEVER
MULTI JACK
DOCKING STATION (optiona:
POWER CORD
TO DC JACK
Docking Station (optional: CU-V70KIT E) Attachment
When you attach your camcorder to the Docking Station, you can add many interesting effects during playback.
1
2 PLACE CAMCORDER IN DOCKING STATION
If you plan to use the MENU button while the camcorder is docked, you need to pull out its viewfinder before attaching.
3 ATTACH AND LOCKS
Press down on the camcorder and slide the Lock Lever in the direction of the arrow. The camcorder and the Docking Station are now securely attached.
•Make sure that the camcorder does not have a DC cord or an AV cable connected to it before attaching.
•When removing the camcorder, press the Release button and lift the camera out.
4 SUPPLY POWER
Connect the AC Adapter between the Docking Station and an AC outlet.
•The Docking Station cannot function using the camcorder’s battery.
5 SELECT MODE
Set the Power Dial to “PLAY”.
Using The Remote Control During Playback
Once the camcorder is attached to the Docking Station, you can use the
Charging The Camcorder Battery
If you attach the camcorder with the battery installed to the Docking Station, you can charge the battery. Set the Power Dial to “OFF”, then perform steps 1 through 4 of the Docking Station Attachment procedure. The Docking Station’s charging lamp starts blinking to indicate that charging has begun. When it stops blinking but stays on, charging is complete.
CHARGING TIME
BATT. PACK | CHARGE |
approx. 170 min. | |
|
|
approx. 180 min. |
•Do not attach or remove the battery while the camcorder is attached to the Docking Station.
