EN 15
TW
Remote Control Unit (optionally available accessory kit CU-V70KIT E)
You can use the RM-V708U or RM-V710U to control the camcorder when it’s attached to the Docking Station.
Operation Buttons
(Z pg. 48)
INSERT Button (Z pg. 58)
UP Button (Z pg. 48)
Installing The Battery
The RM-V708U
or RM-V710U
uses one lithium
battery (CR2025).
MBR SET Button (Z pg. 51)
AUDIO MONITOR
Button (Z pg. 57)
DOWN Button (Z pg. 48)
AUDIO DUBBING
Button (Z pg. 57)
R.A. EDIT Buttons (Z pg. 52)
PAUSE IN connector (Z pg. 52)
ZOOM Buttons (Z pg. 48)
DISPLAY Button (Z pg. 57)
SHIFT Button (Z pg. 48)
SLOW Rewind/Forward
Buttons (Z pg. 48)
LEFT/RIGHT Buttons
(Z pg. 48)
FADE/WIPE Button
(Z pg. 52)
EFFECT ON/OFF Button
(Z pg. 49)
EFFECT Button
(Z pg. 49)
RECORDING START/STOP Button (Z pg. 58)
POWER ON/OFF Button
When the camcorder’s Power
Dial is set to “PLAY”, you can turn
the unit’s power on and off using
the RM-V708U or RM-V710U.
KNOB
CANCEL Button (Z pg. 53)
1
PULL OUT BATTERY HOLDER
Pull out in the direction of the arrow while
pressing the lid as shown.
2
INSERT BATTERY IN HOLDER
With the “+” side up, place the lithium battery
(CR2025) in the holder.
3
RE-INSERT HOLDER
Slide the holder back in until you hear a click.