
54

EN 

















































EDITIN
G (Cont.)
| 1 WH | I N |
| OUT | MODE | |
| 00 | : 25 ~ 02 : 05 | P | |||
| 2 | P 07 | : 18 ~ 08 : 31 |
| ||
| 3 | 03 | : 33 | ~ 05 : 53 | B/W | |
| 4 | 09 | : 30 | ~ 13 : 15 |
| |
| 5 | 15 | : 55 | ~ : |
| |
| 6 |
|
| ~ |
| |
| 7 |
|
| ~ |
| |
| 8 |
|
| ~ |
| |
FF BUTTON | T I ME CODE | 15 : 55 |
| |||
REW BUTTON | TOT AL |
| 09 : 02 |
| ||
R.A.EDIT PROGRAMME SCREEN | ||||||
| ||||||
STOP BUTTON |
|
|
|
|
|
EDIT BUTTON
| |
T W | (optional: |
FADE/WIPE BUTTON
EFFECT BUTTON
EDIT IN/OUT BUTTON
VCR RECORD/
STANDBY BUTTON
9 PREPARE SOURCE TAPE Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE.
10 ENGAGEMODE VCR'S RECORD-PAUSE
Point the remote control toward the VCR's infrared sensor and press VCR RECORD/ STANDBY, or manually engage the VCR's
11 START EDITING
Press EDIT on the Docking Station. Editing proceeds as programmed, right through to the end of the last registered scene.
•If you selected a Fade/Wipe effect, it is active between selected scenes during dubbing.
•If you selected a P.AE/Effect, it is active during scenes while dubbing.
•When dubbing is complete, the camcorder enters the PAUSE mode, and the recorder enters its RECORD/STANDBY mode.
•If you don’t register an
12 STOP EDITING
Engage the STOP modes for the camcorder and the recorder.
NOTES:
●During dubbing, make sure the remote control is pointed at the recorder’s sensor, and that the path between the two is unobstructed.
●If, during dubbing, you press a button on the camcorder, its RECORD/STANDBY mode is automatically engaged.
●Random Assemble Editing may not function
properly when using a tape including several duplicated Time Codes. ((☞ pg. 27)
●When using MOSAIC FADER, black bars may appear at the bottom and left of the screen.