To install the optional Capture Card:
1.On the main Capture Card, remove the 7-wire TV/Audio cable and lay the cable over the DX8100 I/O card. Refer to callout 2c in Figure 11 for the location of the TV/Audio cable.
2.Do the following:
a.Remove the slot cover for slot 3 and retain the screw.
b.Place the optional Capture Card under the 5-wire Alarm and Relay cable from the main Alarm and Relay I/O board and firmly seat the card in the PCI slot 3 connector, and then secure the Capture Card bracket with the screw.
c.Connect the 7-wire TV/Audio cable to the TV/Audio connector on the optional and main Capture Card.
d.Verify that the 5-wire Alarm and Relay cable from the main Alarm and Relay I/O board is firmly inserted in the I/O connector on the main Capture Card.
e.Connect the 5-wire Alarm and Relay cable from the DX8100 I/O card to the I/O connector on the optional Capture Card.
f.Connect the 32-pin ribbon cable from the DX8100 I/O card to the second video connector on the optional Capture Card.
g.Insert the 14-pin ribbon cable into the PB-Path connectors on the optional, and then main Capture Card.
h.This completes installation of the Capture Card. Continue to Reassemble the Unit on page 14.
Figure 11. Installing the Optional Capture Card
