GE 200D8074P050 Installation Instructions INSTALLING THE REFRIGERATOR, Refrigerator Location

Installation Instructions

INSTALLING THE REFRIGERATOR

REFRIGERATOR LOCATION

•Do not install the refrigerator where

the temperature will go below 60°F (16°C) because it will not run often enough to maintain proper temperatures.

•Do not install the refrigerator where

the temperature will go above 100°F (37°C) because it will not perform properly.

•Install it on a floor strong enough to support it fully loaded.

CLEARANCES

Allow the following clearances for ease

of installation, proper air circulation and plumbing and electrical connections:

		23‘ (33” wide),
	23‘/25‘ CustomStyle™	25‘, 26‘, 27‘, 29‘
Sides	1/8” (4 mm)	1/8” (4 mm)
Top	1” (25 mm)	1” (25 mm)
Back	1/2” (13 mm)	1” (25 mm)

DIMENSIONS AND SPECIFICATIONS

	Water	Electrical
	3/4” (19 mm)
	Airspace
24” (61 cm)	(1/2” [13 mm] Gap +		25” (63.5 cm)
	1/4” [6 mm] Wall
Cabinet			Countertop
	Plates)

DIMENSIONS AND SPECIFICATIONS (for 23‘ CustomStyle™ models)

701⁄4” (178.4 cm)

36”

(91.4 cm)

24” (61 cm)

DIMENSIONS AND SPECIFICATIONS (for 25‘ CustomStyle™ models)

721⁄4” (183.5 cm)*

36”

(91.4 cm)

24” (61 cm)

*721/4” (183.5 cm) required for full adjustment of mobility wheels. If cabinets installed above refrigerator have doors that are flush to the top of the opening for the refrigerator, then an additional 1/8” may be required to provide clearance for cabinet doors to open freely.

28