Safety Instructions

About Set Features.

This pad is used to select the following

exit the mode. If no key is pressed, the mode

features: TurboCool, Quick Ice, Door Alarm

will exit and return to displaying features

and Water Filter.

currently set.

Pressing SET FEATURES repeatedly will cycle

 

through all of the available features and then

 

About TurboCool.

 

Operating Instructions

Installation Instructions

TURBOCOOL

LCD Models Only

How it Works

TurboCoolrapidly cools the refrigerator compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for eight hours. The compressor will continue to run until the refrigerator compartment cools to approximately 34°F (1°C), then it will cycle on and off to maintain this setting. After

8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to the original setting.

How to Use

LCD Models:

Access By: Home > Options > Refrigerator Options > TurboCool

Activate By: Pressing ON.

Deactivate By: Pressing OFF.

Non-LCD Models:

Press SET FEATURES. The refrigerator temperature display will show TurboCool and/or TC. Press ON/OFF.

After TurboCool is complete, the refrigerator compartment will return to the original setting.

NOTES:

The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during TurboCool, the fans will continue to run if they have cycled on.

Tips

About ClimateKeeper2.(on some models)

Consumer Support Troubleshooting

How it Works

The ClimateKeeper2is the industry’s

most advanced refrigeration system,

delivering optimum temperature and

humidity performance to keep food garden

fresh longer and reduce freezer burn, while

maintaining E star-level efficiency.

The ClimateKeeper2 system features two

evaporators—one for the refrigerator and

one for the freezer.

This provides two separate cooling systems, and separates the airflow between the fresh food and freezer compartments during normal cooling operations.*

This ensures that the humidity levels in

the fresh food compartment are significantly higher than in a conventional system,** allowing fresh produce and other unsealed foods to retain their moisture content and freshness longer. Moisture sensitive foods such as fresh fruit, salads, rice, etc., can now

6be stored on open shelves without excessive moisture loss. Due to the higher humidity in

the refrigerator, you may on occasion experience fog or small amounts of moisture in the refrigerator compartment. This is normal and may come and go as different food loads and environmental conditions change. Wipe dry with a paper towel if desired.

The separate airflow system minimizes the mixing of air between the two compartments, which reduces fresh food odor transfer to improve the taste of ice.

The ClimateKeeper2 system also reduces the number of defrosting cycles in the freezer evaporator, thereby reducing freezer burn.

*Freezer air is used in the CustomCool feature.

**Testing shows a higher level of humidity in the Fresh Food section in ClimateKeeper2 refrigerators versus conventional units.

Page 6
Image 6
GE 200D8074P050 About Set Features, About TurboCool, About ClimateKeeper2. on some models, Safety Instructions, Tips

200D8074P050 specifications

The GE 200D8074P050 is a sophisticated component renowned for its reliability and performance in various industrial applications. As part of General Electric's extensive lineup of products, this unit exhibits a range of features and technologies designed to meet the stringent demands of modern electrical systems.

One of the standout characteristics of the GE 200D8074P050 is its robust construction aimed at ensuring durability and longevity. Built with high-quality materials, this component is engineered to withstand challenging operating conditions, making it suitable for heavy-duty industrial environments. Its durability is complemented by its efficient thermal management capabilities, which allow for stable performance even under significant load conditions.

Another notable feature is its advanced electrical characteristics. The GE 200D8074P050 is designed for optimal efficiency with a well-balanced power handling capacity. This translates to lower operating costs and reduced energy consumption, aligning with contemporary standards for sustainability and environmental responsibility. Furthermore, the unit has excellent voltage regulation technologies, ensuring minimal fluctuations and enhancing the reliability of the entire electrical system.

The integration of cutting-edge technologies is a hallmark of the GE 200D8074P050. It often includes features such as digital control mechanisms and real-time monitoring capabilities, facilitating easier diagnostics and maintenance. These technologies not only enhance operational efficiency but also improve safety by quickly identifying potential issues before they escalate into more serious problems.

The GE 200D8074P050 is also designed with adaptability in mind. It can be seamlessly integrated with existing systems, providing versatility across a wide range of applications, from manufacturing to power generation. Additionally, the component is compliant with various industry standards, which assures users of its reliability and performance consistency.

In summary, the GE 200D8074P050 exemplifies a blend of quality, technology, and performance. With its rugged design, efficient power handling, advanced monitoring capabilities, and adaptability, it stands out as an essential component for industries looking to enhance their operational effectiveness while maintaining high standards of safety and reliability. As industrial settings continue to evolve, the integration of components like the GE 200D8074P050 will be crucial in driving efficiency and performance.