GE 200D8074P050 About the ice and water dispenser. on some models, To Use the Dispenser, Safety

About the ice and water dispenser. (on some models)	GEAppliances.com
To Use the Dispenser

Safety

	Select CUBED, CRUSHED or WATER.
	Press the glass gently against the top
	of the dispenser cradle.
	The spill shelf is not self-draining. To reduce water
	spotting, the shelf and its grille should be cleaned
	regularly.
	If no water is dispensed when the refrigerator is
	first installed, there may be air in the water line
	system. Press the dispenser arm for at least two
	minutes to remove trapped air from the water line
	and to fill the water system. To flush out impurities
	in the water line, throw away the first six glassfuls
Spill Shelf	of water.
	CAUTION: Never put fingers or any other objects
	into the ice crusher discharge opening.

when the dispenser cradle is pressed. On some models, if this light burns out, it should be replaced with a 6 watt 12V maximum bulb.

Door Alarm

Use Door Alarm to sound if either door is open for more than 3 minutes. The alarm will stop once the door is closed. For LCD models, a popup screen will appear. The alarm can be silenced by touching the LCD screen.

LCD Models:

Access By: Home > Options > Information and Settings > Settings > Door Alarm

Access By: Pressing ON.

Deactivate By: Pressing OFF.

Instructions Operating

Locking the Dispenser	Non-LCD Models:
Press the LOCK or LOCK CONTROLS pad for	Press the SET FEATURES pad once and DOOR
3 seconds to lock the dispenser and control panel.	ALARM will blink. Press ON/OFF and the door
To unlock, press and hold the pad again for	alarm will be set and the icon will turn solid. Press
3 seconds.	ON/OFF again to turn the alarm off.
Dispenser Light
The LIGHT pad turns the night light in
the dispenser on and off. The light also comes on

Instructions

Quick Ice

When you need to speed up ice production, use the Quick Ice feature. While this feature is turned on, the freezer fan runs continuously for 48 hours, or until the feature is turned OFF. During this period, ice production will increase up to 40%. Models with the integrated ice feature system require at FIRST USE at least half an 8 oz. glass of ice to be dispensed every 6 to 12 hours. This will help the icemaker fill the bucket properly so that dispensing is better.

How to Use

LCD Models:

Access by: Home > Options > Freezer Options > Quick Ice

Activate by: Pressing ON.

Deactivate by: Pressing OFF.

Non-LCD Models:

Press the SET FEATURES pad twice and QUICK ICE will blink. Press ON/OFF to turn the feature on, then again to turn it off.

Installation Instructions

Precise Fill (on some models)

This water dispenser is equipped with a feature called “precise fill.” This feature allows you to choose a precise amount of water (cups or ounces) that you would like dispensed. Pints and Liters are also available for LCD models.

LCD Models

Access By: Home > Options > Dispenser Options > Precise Fill > Set Amount

Activate By: Using the arrow buttons to select the desired amount. Press MORE UNITS to select between CUPS, OUNCES, PINTS or LITERS.

Non-LCD Models

Press the PRECISE FILL CUPS/OZ pad.

The WATER pad will light and the CRUSHED and CUBED ice pads will turn off. The last unit used will be displayed.

Press the PRECISE FILL pad again to toggle between cups and ounces.

If you selected OUNCES, press the> or >pad to select the number of ounces you would like to have dispensed between 2–99 ounces.

The default is 8 ounces.

If you selected CUPS, press the> or >pad to select the amount you would like to have dispensed. They are displayed as 1/4, 1/3, 1/2, 2/3 and 3/4, with the highest amount being 16 3/4 cups. The default is 1 cup.

Press the cup against the cradle and water will begin dispensing. It will automatically stop when the amount set has been dispensed. The display will show the amount of water dispensed, beep, then reset after 5 seconds.

NOTE: Do not leave the dispenser unattended when water is being dispensed.

If you would like to stop dispensing water before the specified amount has been dispensed, just remove the cup from the cradle. The display will show the amount that has been dispensed for 5 seconds. If the cup switch is pressed again within that time, the dispenser will continue up to the set amount. If not, the display will return to the set

amount.15

Troubleshooting Tips Consumer Support