Installation Instructions

WHAT YOU WILL NEED (CONT.)

NOTE: The only GE approved plastic tubing is that supplied in GE SmartConnect™ Refrigerator Tubing kits. Do not use any other plastic water supply line because the line is under pressure at all times. Certain types of plastic will crack or rupture with age and cause water damage to your home.

•A GE water supply kit (containing tubing, shutoff valve and fittings listed below) is available at extra cost from your dealer or from Parts and Accessories, 800.626.2002 (in Canada 1.888.261.3055).

•A cold water supply. The water pressure must be between 20 and 120 p.s.i. (1.4–8.1 bar).

•Power drill.

•1/2” or adjustable wrench.

•Straight and Phillips blade screwdriver.

•Two 1/4 ” outer diameter compression nuts and 2 ferrules (sleeves)—to connect the copper tubing to the shutoff valve and the refrigerator water valve.

OR

•If you are using a GE SmartConnect™ Refrigerator Tubing kit, the necessary fittings are preassembled to the tubing.

•If your existing copper water line has a flared fitting at the end, you will need an adapter (available at plumbing supply stores) to connect the water line to the refrigerator OR you can cut off the flared fitting with a tube cutter and then use a compression fitting. Do not cut formed end from GE SmartConnect™ Refrigerator tubing.

•Shutoff valve to connect to the cold water line. The shutoff valve should have a water inlet with a minimum inside diameter of 5/32” at the point of connection to the COLD WATER LINE. Saddle-type shutoff valves are included in many water supply kits. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes.

Install the shutoff valve on the nearest frequently used drinking water line.

1SHUT OFF THE MAIN WATER SUPPLY

Turn on the nearest faucet long enough to clear the line of water.

2CHOOSE THE VALVE LOCATION

Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to connect into a horizontal water pipe, make the connection to the top or side, rather than at the bottom, to avoid drawing off any sediment from the water pipe.

3DRILL THE HOLE FOR THE VALVE

Drill a 1/4” hole in the water pipe (even if using a self-piercing valve), using a sharp bit. Remove any burrs resulting from drilling the hole in the pipe.

Take care not to allow water to drain into the drill.

Failure to drill a 1/4” hole may result in reduced ice production or smaller cubes.

33

Page 32 Page 34
Page 33
Image 33
GE 200D8074P050 Shut OFF the Main Water Supply, Choose the Valve Location, Drill the Hole for the Valve
Page 32 Page 34

200D8074P050 specifications

The GE 200D8074P050 is a sophisticated component renowned for its reliability and performance in various industrial applications. As part of General Electric's extensive lineup of products, this unit exhibits a range of features and technologies designed to meet the stringent demands of modern electrical systems.

One of the standout characteristics of the GE 200D8074P050 is its robust construction aimed at ensuring durability and longevity. Built with high-quality materials, this component is engineered to withstand challenging operating conditions, making it suitable for heavy-duty industrial environments. Its durability is complemented by its efficient thermal management capabilities, which allow for stable performance even under significant load conditions.

Another notable feature is its advanced electrical characteristics. The GE 200D8074P050 is designed for optimal efficiency with a well-balanced power handling capacity. This translates to lower operating costs and reduced energy consumption, aligning with contemporary standards for sustainability and environmental responsibility. Furthermore, the unit has excellent voltage regulation technologies, ensuring minimal fluctuations and enhancing the reliability of the entire electrical system.

The integration of cutting-edge technologies is a hallmark of the GE 200D8074P050. It often includes features such as digital control mechanisms and real-time monitoring capabilities, facilitating easier diagnostics and maintenance. These technologies not only enhance operational efficiency but also improve safety by quickly identifying potential issues before they escalate into more serious problems.

The GE 200D8074P050 is also designed with adaptability in mind. It can be seamlessly integrated with existing systems, providing versatility across a wide range of applications, from manufacturing to power generation. Additionally, the component is compliant with various industry standards, which assures users of its reliability and performance consistency.

In summary, the GE 200D8074P050 exemplifies a blend of quality, technology, and performance. With its rugged design, efficient power handling, advanced monitoring capabilities, and adaptability, it stands out as an essential component for industries looking to enhance their operational effectiveness while maintaining high standards of safety and reliability. As industrial settings continue to evolve, the integration of components like the GE 200D8074P050 will be crucial in driving efficiency and performance.
Top Page Image Contents