Pelco dx8100-exp installation manual Interfacing the Expansion Unit and DX8100

To connect the Expansion Unit to the DX8100 DVR:

1.Do one of the following:

•Desktop mounting: Set the Expansion to the side or on top of the DX8100.

•Rack mounting: Attach the rack mount kit and install the Expansion Unit in the rack enclosure directly above the DX8100.

2.Connect the 50-pin Expansion cable end (partially shown in Figure 15) to the Expansion Unit connector, and then connect the 50-pin Expansion cable end to DX8100 I/O card.

3.Plug the power cord back into the DX8100 and then into the wall.

Figure 15. Interfacing the Expansion Unit and DX8100

16 C2636M-B (4/07)