Pelco dx8100-exp installation manual Connecting the Expansion Unit to the DX8100

Connecting the Expansion Unit to the DX8100

This section describes how to connect the Expansion Unit to the DX8100. The Expansion Unit can be rack mounted, positioned to the side, or set on top of the DX8100. Figure 14 shows how to assemble the rack mount kit.

Figure 14. Assembling Expansion Unit Rack Mount Kit

Table H describes the items included in the Expansion Unit rack mounting kit. The Expansion Unit mounting dimensions are as follows:

•Desktop: 1.73 (H) x 17 (W) x 8.19 (D) inches (4.39 x 43.18 x 20.80 cm)

•Rack Mount: 1.73 (H) x 19.0 (W) x 8.19 (D) inches (4.39 x 48.26 x 20.80 cm)

Table H. Expansion Unit Rack Mounting Kit

Item

Qty

Description

2

Rack ears

8

6-32 x 0.375-inch Phillips screw

4

Rack screw washers

4

10-32 x 0.750-inch Phillips screw

To install the Expansion Unit in an equipment rack:

1.Attach the rack ears to the Expansion Unit using the eight 6-32 x 0.375-inch Phillips screws. Refer to Figure 14.

2.Using the remaining four 10-32 x 0.750-inch Phillips screws and rack screw washers, install the Expansion Unit in the rack, above the DX8100.

C2636M-B (4/07) 15