First Alert DW-702, DW-700 user manual To select Quad display ON/OFF

Page 19

QUAD DISPLAY

1. Use

to select Quad display ON/OFF.

2.Press to confirm the change.

3.Turn all available channels ON before changing to Quad mode.

4.To exit the Quad display, press directional keys to enter single channel:

= CAM1; = CAM2; = CAM3; = CAM4

Quad mode is recommended when the system is equipped with more than one camera. The system will only record one channel, not the Quad display.

SCAN PERIOD

Scan Period selects the time each camera will be displayed.

1. Use

to change Scan Time interval: OFF, 5 sec, 10 sec, or 15 sec.

2. Press to confirm the change.

This function is available for multi-camera systems. Only camera of current display can be triggered during scan time. Recommended scan time is 5 sec.

Scan Time turns off when CH+, CH-, or REC is selected for manual scan or record.

15

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Page Table of Contents Troubleshooting Technical Information Safety Precautions SafetyFCC Compliance Getting to Know Your DW-700/702 Security System Check Package ContentsDigital Wireless Camera Menu ESC REC DEL Digital Wireless ReceiverRemote Control Display Screen Icons General Precautions Setting Up Your DW-700/702 Security SystemInstalling the Camera Installing the Receiver Main Menu Operation Operating MenusCamera ON/OFF Camera SetupPairing Recorder Setup To select ON/OFF. Default setting is on Event List System SetupTo select Quad display ON/OFF Timing Setting PAL System Version Shows No Signal TroubleshootingTechnical Information Camera WirelessTechnical Information GeneralStorage Data Management Product Limited Warranty WarrantyWarranty Exclusions Obtaining Service
Top Page Image Contents