5. Preparing Your Camera
|
|
●Insert the thin end of the strap into the strap holder.
.
●Pass the other end of the strap through the loop.
●Pull the strap tight.
●Turn the camera off.
●Insert 2 x AAA alkaline batteries or rechargeable
batteries. Please make sure the batteries are fully charged. If the batteries are low, please change the batteries as soon as possible to maintain normal operation.
※If the battery power indicator only shows one black
block, the flash is disabled. If power is less than 1.8V (the level at which the battery power indicator turns red) the camera automatically turns off.
●Slide the battery cover open in the direction indicated by the arrow.
●Insert the batteries according to the indication on the inside of the compartment cover.
16