DXG Technology DXG-328 manual Power Supply, Shutter Button

3-3 Power Supply

●Depress the power button until a long beep sounds. Power is on.

●Depress the power button sound until a long beep sounds. Power is off.

※If no operations are performed for 60 seconds, the

power is turned off to prevent battery drain. Please power on the camera again to resume shooting.

※The following features are automatically saved in the

configuration before the camera is turned off unless "Reset Default" has been selected to restore its factory settings.

1.Resolution 2. Image Quality 3. Language

4.White balance 5. EV value 6. Frequency

7.PC MODE

3-4 Shutter Button

●Depress the power button to turn on the camera.

After the camera is on, the red LED will blink, and then the last image recorded will appear on the LCD monitor.

This camera is designed for 2-step shutter function. A set of yellow brackets "[ ]" will appear in the center of the LCD monitor when the Shutter button is pressed and held half way down. The camera will beep after the Shutter button is depressed fully to indicate the shot is being taken.

8