6. Getting Started
6-1 Setup Mode 
In Setup Mode, you can adjust settings, including Image Size, Image Quality, White balance, and EV Compensation; format and factory default setting. Setup language, date/time, and light frequency as follows:
1.Turn the camera on.
2.Press Mode Button 
for two seconds and
use the Function keys 
to move to 
.
3.Press the
Button to get into Setup Mode screen, the LCD monitor will display the menu.
4.Use the “ ” of the UP/DOWN Function keys 
to move between selections; use “ ” to toggle between submenus (Image Options, Option and System Options).
5.Then use the
Button to enter the menu. Make your selections with “ ” and ” ”.
6.Last, use the 
Button to confirm selections.
6-2 Record Mode 
Record Mode offers you a quick and easy way to take ideal pictures.
1.Turn on the camera to go directly into Record Mode. You can also enter into Record Mode through Mode
Button 
and use the Function key 
to
move to 
, and select 
.
Upon entering, images will appear on the LCD monitor.
2.Press and hold the Shutter button half way down. Yellow brackets“[ ]" will appear in the center of the LCD monitor for the automatic exposure. Fully depress the Shutter button and release it to complete the recording.
3.You can use 
to select two flash modes when using the camera: Auto, and Off.
4.Press the Mode Button 
to toggle
the LCD Monitor displays. There are five display modes: Standard Display, Full Display, Image Only, LCD Monitor Off, and Only Operation Settings.
5.Use the Mode Button 
to set the details for recording images; e.g., Image Resolution, Image Quality,
Button 
is pressed. Use “ ” of the
Function key 
to move between selections.
6.Use “ ” and ” ” of the Function key 
to adjust the digital zoom. The adjustment ratio of the digital zoom will appear on the left hand side of the LCD monitor, from 1.0 time to 4.0 times, with 0.5 times increase at each adjustment.
7.The green LED is on when the Macro key on the left
19