Elmo ESD-370 user manual Alarm Pin Definition, 2.8 RS-485 Connector, Cable Color

Page 14

User’s Manual

2.7Alarm Pin Definition

The alarm pins are serviceable for connecting alarm in- and output devices. Following lists the definition of alarm pin on the 22-pin connector located on the bottom of the dome camera.

Pin	Cable Color	Definition
2	White	ALM NO
4	Black	ALM NC
6	Green	ALM COM
11	Green/Black	ISOG
12	Purple	ALM-1
13	Gray	ALM-3
14	Red	ALM-2
15	Blue	ALM-4
16	Blue/White	ALM-5
17	Brown/White	ALM-6
18	Red/White	ALM-7
19	Purple/White	ALM-8
20	Black/White	ALM GND

2.8RS-485 Connector

RS-485 is the interface that communicates the dome camera and its control device. Please connect control keyboard to speed dome through the terminal block. The recommended cables for RS-485 communication are CAT 5 cables; maximum cable length for over 24-gauge wire is 4000 feet (1219 meters). If the total cable length is over 4000 feet, using a repeater to enlarge the signals is recommended.

	Definition	Cable Color
	T+ (D+)	Yellow

	T- (D-)	Green

	R+ (D+)	Brown

	R- (D-)	Orange

Image 14

Contents Integrated High Speed Dome Camera ESD-370User’s Manual User’s Manual CopyrightImportant Information Cautions Operation and Configuration Content2. Connecting the High Speed Dome OverviewAppendix A Technical Specification 3.3.18 ALARM DETECT E/F/U Model OnlyError! Bookmark not defined 3.3.131. Overview Perfect Contrast Solution for High Image Quality 1.1 Product FeaturesDay/Night Features Precise and Accurate TrackingPrivacy Mask for Privacy Protection 1.2 Product ApplicationDynamic Dome Configuration Integrated with Web, Enhanced Internet Capability Optional2. Connecting the High Speed Dome 2.1 Package ContentRS-485 Communication 2.2 Switch Definition2.3 RS-485 Setting 2.5 Dome Control Protocol 2.4 Dome ID SettingSwitch No ProtocolAC24-1 2.6 22-Pin Connector DefinitionColor WhiteOrange Alarm Pin Not wiredYellow BrownCable Color 2.7 Alarm Pin Definition2.8 RS-485 Connector DefinitionPosition 3. Operation and Configuration3.1 OSD Display Format FunctionLayer Default3.2 OSD Menu Tree Layer DefaultLayer LayerLayer 3.3 Configuration Menu 3.3.1 DEFAULT CAMERA3.3.4 APERTURE 3.3.2 BACKLIGHT3.3.3 FOCUS AUTOH APERTURE 3.3.5 AE MODEAPERTURE MENU V APERTURELight Sources 3.3.6 WBC MODE3.3.7 ID DISPLAY Color Temperature in K3.3.8 SETUP MENU FLIP IMAGE/ME/OFFAUTO CALIBRATION ZOOM SPEEDSPEED BY ZOOM DIGITAL ZOOMSLOW SHUTTER ANGLE ADJUSTERRESET EXIT3.3.11 TITLE SETTING 3.3.10 TITLE DISPLAYALARM SWITCH 3.3.12 ALARM SETTINGALARM PIN ALARM TYPEPRESET 3.3.13 HOME SETTINGALARM ACTION SEQUENCERETURN TIME HOME FUNCTIONSELECT MODE TILT degree/sec 3.3.14 SEQUENCEPAN degree/sec 3.3.15 AUTOPAN as endpoint 3.3.16 CRUISE 3.3.19 WDR Setting DR Model Only 3.3.17 IR FUNCTION Removable IR Cut3.3.20 PRIVACY SET MASK PRIVACY SWITCHSHADE H CENTER 000~256MASK DISPLAY 3.3.21 TIME FUNCTIONMASK CLEAR+RESET FIRST3.3.22 SCHEDULE FUNCTION 3.3.23 EXIT OSD IR FUNCTIONAppendix A Technical Specification All specifications are subject to change without noticeGENERAL OSD Menu Notes LayerCRUISE WDR SETTINGAUTOPAN IR FUNCTIONELMO USA Corp 1478 Old Country Rd Plainview, NY

Related manuals

Manual 4 pages 47.24 Kb