FujiFilm FinePix A607 owner manual Launching the installer manually, Installing other applications

5.1 INSTALLATION ON A Windows PC

Do not connect the camera to your PC until the software installation is completed.

1 Install FinePixViewer as instructed in the Quick start guide.

◆ Launching the installer manually ◆

1 Double-click the “My Computer” icon.

✽Windows XP users should click “My Computer” in the “Start” menu.

2 Right-click “FINEPIX” (CD-ROM drive) in the “My Computer” window and select “Open”. 3 Double-click “SETUP” or “SETUP.exe” in the CD-ROM window.

✽The way file names are displayed differs as described below depending on your computer settings.

iFile extensions (3-letter suffixes indicating the file type) may be shown or hidden. (e.g. Setup.exe or Setup)

iText may be shown normally or all in uppercase (e.g. Setup or SETUP).

◆ Installing other applications ◆

You may see messages for installing ImageMixer VCD2 for FinePix and WINASPI. Install these applications as directed by the on-screen instructions. The installation screens for these applications are displayed as required.

After restarting the PC, install DirectX as directed by the on-screen instructions and then restart

2 your PC again. If the latest version of DirectX is already installed on your PC, this installation is not performed.

●! If the latest version is already installed, this window does not appear. ●! Do not remove the CD-ROM during this procedure.

After the restart, the USB Video Class driver is

3 installed.

●! If the latest version is already installed, this window does not appear.

●! The driver is only installed on Windows XP SP 1.

After restarting the PC, the “Installation of the FinePixViewer has been completed” message

4 appears.

54