FujiFilm FinePix A607 Installation on a Mac OS, Turn on your Macintosh and start up Mac OS

5.2 INSTALLATION ON A Mac OS 9.2

Pre-installation checklist

To run this software, you must have the hardware and software described below. Check your system before you begin the installation.

Compatible Mac	Power Macintosh G3✽1, PowerBook G3✽1,
	Power Macintosh G4, iMac, iBook,
	Power Macintosh G4 Cube or PowerBook G4
Operating System	Mac OS 9.2.2✽2
RAM	64 MB minimum✽3, 256 MB or more recommended
	(When using ImageMixer VCD2 for FinePix: 128 MB or better)
Hard disk space	Amount required for installation: 400 MB minimum
	Amount required for operation: 600 MB minimum
	(When using ImageMixer VCD2 for FinePix: 2 GB or better)
Display	800 ⋅ 600 pixels or better, at least 32,000 colors
	(When using ImageMixer VCD2 for FinePix: 1024 ⋅ 768 or better)
Internet connection✽4	i To use the FinePix Internet Service or mail attachment function
	An Internet connection and e-mail transmission software
	i Connection speed: 56 k or better recommended

✽1 Models with a USB port as a standard feature

✽2 This software does not run correctly in the Mac OS X Classic environment. ✽3 Turn virtual memory on if necessary.

✽4 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet connection.

◆ Notes ◆

i Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use an extension cable or connect the camera via a USB hub.

i Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the connection is faulty.

i Additional USB interface board is not guaranteed.

i On Macintosh computers, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER LE is used. If other applications will be used at the same time, allocate the additional amount required for those applications also.

Turn on your Macintosh and start up Mac OS 9.2.2.

1 ●! Do not connect the camera to your Macintosh until the software installation is completed.

When the bundled CD-ROM is loaded into the CD-ROM drive, the [FinePix] volume appears.

2 Double-click the volume icon to open the volume window.

●! If the “FinePix” window does not open automatically, double-click the CD-ROM icon.

3 Double-click “Installer for MacOS9” to launch the Installer.

5

Software Installation

Continued 55