Appendix A

8-Port Expansion Module Option

Introduction

AAn optional eight-port expansion module, Model OM-MP8-100, is available for OMEGA. This expansion module allow up to eight endpoint devices (such as meters, relays, and controllers) with internal modems to connect to a single OMEGA Model OM-AMPS-100 Cellular Interface Cabinet.

This appendix describes how to install the expansion module. For more information about the expansion module, please contact Telenetics.

Package Contents

The 8-Port Expansion Module package contains the following items:

cOne OMEGA 8-Port Expansion Module (Model Number. OM-MP8-100)

cTwo plastic card guides

cOne short RJ-11 to RJ-11 cable

cA diskette containing configuration software

cA Quick Start Guide

If any of these items are missing or damaged, please contact

Telenetics immediately.

Field Installation

The eight-port expansion module is designed for simple installation in the field. Use the following procedure to install the module.

1.Set the Power Battery switch to the OFF position and lift the AC fuse connector (see Figure 1-1 on page 13).

2.Orient the two plastic card guides so their slots face inward toward each other. Snap the guides into place in the holes in the OMEGA baseboard.

OMEGA Installation, Operation, and Maintenance Manual

55

Page 55
Image 55
Telenetics OM-AMPS-100 manual Package Contents, Field Installation