Telenetics OM-AMPS-100 manual Programming a Telephone Number, Example of Signal Bar

Section 4

Using the Configuration Program

Figure 4-3. Example of Signal Bar

2.To exit this mode and return to the Main Menu, press the Esc key.

Programming a Telephone Number

Use the following procedure to program a telephone number into the OMEGA’s cellular telephone.

1.From the Main Menu in Figure 4-2, press 2. The message Waiting for response… appears, then the configuration program prompts you for a password (see Figure 4-4).

Figure 4-4. Password Prompt

2.Type the password and press Enter. Initially, there is no password, so press Enter without typing any characters. The message Checking password… appears followed by the secondary menu (see Figure 4-5).

Figure 4-5. Secondary Menu

3.At the ? prompt, press 2. The configuration program prompts you for a new telephone number.

4.Type the 10-digit telephone number (area code and telephone number). You do not have to press Enter after typing. The message Updating phone number… appears followed by Phone number updated! Then the secondary menu reappears with the new telephone number displayed.

42 OMEGA Installation, Operation, and Maintenance Manual