Telenetics OM-AMPS-100 manual Required Materials and Tools, Mounting Omega

Section 1 Contents

Required Materials and Tools

You need the following materials to install the OMEGA unit:

cEither screws or bolts to attach OMEGA to a mounting surface.

cWashers to fit with the screws or bolts.

cA ¾-inch plywood backplate if the mounting surface is dry wall.

Have the following tools available for installing the OMEGA unit:

cAppropriate tools for the hardware you are using to mount the unit (for example, a screwdriver and wrench).

cFlex–type conduit if you are installing the unit outside.

cOptional: a telephone handset.

In addition to the tools above, the OMEGA cellular phone must be activated, either by Telenetics or a cellular service provider. If Telenetics does not activate the OMEGA cellular phone, use the supplied OMEGA configuration program or the optional OmegaMate to configure the phone’s electronic serial number (ESN) and phone number.

Mounting OMEGA

Mount and secure OMEGA to a wall or panel using the supplied fasteners (see Figure 1-2). Any additional hardware required to mount OMEGA on a wall or panel must be user-supplied.

NOTE: Your OMEGA may look different than the one in Figure 1-2.

16 OMEGA Installation, Operation, and Maintenance Manual