Telenetics OM-AMPS-100 manual Entering the Cellular Telephone’s SID, Changing the Login Password

Section 4

Using the Configuration Program

5.Verify that the telephone number displayed above the secondary menu is the one you entered.

Entering the Cellular Telephone’s SID

To enter the System ID number for your local cellular service provider, use the following procedure.

1.If the secondary menu in Figure 4-4 is not displayed, perform steps 1 and 2 under “Programming a Telephone Number” on page 42.

2.At the ? prompt, press 3. The configuration program prompts you for a new SID (see Figure 4-6).

Figure 4-6. New SID Prompt

3.Type the 5-digit SID. You do not have to press Enter after typing. The message Updating SID appears, followed by SID updated! Then the secondary menu reappears with the new SID displayed.

4.Verify that the SID displayed above the secondary menu is the one you entered.

Changing the Login Password

By default, the OMEGA configuration program does not require you to type a password when you log in. If you desire, you can use the following procedure to password-protect the configuration.

1.If the secondary menu in Figure 4-4 is not displayed, perform steps 1 and 2 under “Programming a Telephone Number” on page 42.

2.At the ? prompt, press 1. The configuration program prompts you for a new password (see Figure 4-7).

Figure 4-7. New Password Prompt

OMEGA Installation, Operation, and Maintenance Manual 43