![](/images/new-backgrounds/1263840/26384033x1.webp)
Section 1 Contents
Washer
Screw
Wall
Box
Side view | Back view |
|
|
|
|
|
|
Figure 1-2. Mounting OMEGA
Mounting an Antenna
If your OMEGA does not have an antenna preinstalled.
1.Remove the nylon nut at the base of the antenna. You will use this nut to secure the antenna to OMEGA. Do not remove the washer located between the nut and the antenna.
2.Open the OMEGA enclosure and insert the antenna wire through the OMEGA antenna hole. Then rest the antenna on the OMEGA antenna hole. The bottom of the antenna should protrude through the antenna hole.
3.Attach the antenna wire to the SMA connector on the OMEGA transceiver.
4.Hold the cone part of the antenna with one hand. Then use your other hand to fasten the nut to the bottom of the antenna protruding through the antenna hole. This will secure the antenna to the OMEGA enclosure.
OMEGA Installation, Operation, and Maintenance Manual | 17 |