![](/images/new-backgrounds/1263840/26384087x1.webp)
Section 4
Using the Configuration Program
3.Type the new password. The password can contain up to eight alpha and/or numeric characters. If you type fewer than eight characters, press Enter. The configuration program prompts you to
NOTE: For security purposes, each password character you type appears as an asterisk (*).
4.
After you change the password, you will need to specify it before you can log in to the OMEGA configuration program. To return to the default setting of no password, repeat this procedure but press the Enter key in steps 3 and 4 without typing any characters.
NOTE: If the password you type in step 4 is different than the one you typed in step 4, the message Password mismatch appears and the new password does not take effect. If this happens, repeat this procedure, making sure to type the same characters in steps 3 and 4.
Exiting the Configuration Program
To exit the OMEGA configuration program:
1.From the secondary menu, press Q at the ? prompt. The message Please wait… appears followed by the Main Menu.
2.At the ? prompt, press Q again. You exit the OMEGA configuration program and return to an
3.If your computer is running a Windows operating system, you can close the
44 | OMEGA Installation, Operation, and Maintenance Manual |