AVE MV DR4000 manual RJ-45 PIN configuration for LAN Hub, Connect to WAN Internet

RJ-45 PIN configuration for LAN Hub

PIN NO.	PIN Assignment
1.	TX +
2.	TX -
3.	RX +
4.	Not Connected
5.	Not Connected
6.	RX -
7.	Not Connected
8.	Not Connected

12.1.3 Connect to WAN (INTERNET)

RJ-45 socket

1 2 3 4 5 6 7 8

The RJ-45 PIN configuration for connecting to a WAN is the same as connecting to a LAN.

IN
		hi-z
OUT
		75
		RS-485
		IN
		RS-232
		ETHERNET
		OUT
MONITOR	AUDIO	ALARM	I/O	DC12V
		RJ-45

12.2 Configure Your DVR Network Settings

Upon network hardware connection, you need to activate the network function and configure the proper network settings of the DVR.

12.2.1 Enable DVR Network Function

MAIN MENU

RECORD

ALARM/ MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO COMM PAGE

COMM SETTING

COMM ID	: 01
RS232	: ON
RS485	: ON
NET ENABLE	: ON
NET DHCP	: OFF
NET IP	: SET
FTP SETTING

MAIN PAGE ETHERNET ENABLE

Press the Setup button to enter the OSD MAIN MENU. Please use the“<” “>” buttons and to highlight COMMUNICATION; then press the Enter button to enter the COMM SETTING page.

Use the “^” “v” buttons and to highlight NET ENABLE; select ON. Then press the Enter button to proceed.

67