Jog Dial, Mobile Rack Power LED | AVE MV DR4000 guide

Jog Dial:

The Jog Dial can be used to step frame by frame in the forward or reverse direction. SD CARD Slot:

This is used for system software updating and archiving/accessing critical images.

Mobile Rack Power LED:

Indicates the power status of the Mobile Rack. The green light indicates the Mobile Rack is activate.

Mobile Rack HDD LED:

Indicates the HDD status of the Mobile Rack. The orange light indicates the HDD is storing or retrieving data.

7

Image 9

AVE MV DR4000 manual Jog Dial, Mobile Rack Power LED, Mobile Rack HDD LED

Contents

AVE Page Safety Precautions Table Of Contents IDE Hard Disk Installation Product Introduction Product Features Front View Hard-disk drive compartmentHard disk compartment lock Disk Indicator Rec IndicatorDisplay button Up / Down CH2 / CH1 buttons Mobile Rack Power LED Jog DialMobile Rack HDD LED Between 75Ω and Hi-Z Rear View Alarm In/Out This Figure is Looked from the Rear ViewRecord in Input This pin Connecting with 1 to 4 Cameras Basic ConnectionAttaching AN External Device to DVR Hard-Disk Drive Installation SeagateMaxtor System Information and channel selection 09- 05-2003System Information Size POS Quality Best Ntsc Rate 6 HR Updating System Software Ntsc Audio OFF Configuring Recording SettingsNtsc Audio on PAL Audio OFF PAL Audio on Timer Recording Recording OperationsManual Recording Start END 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 M 0000-0000 W PRE- Alarm OFF Motion Setting Main Alarm REC Enable Alarm / Motion RecordingAlarm / Motion ALM Operation REC Rate REC Quality Best Audio OFF ALM Type ALM Duration Below Externally triggered Recording Playback Operations Operation Status From REC mode to Playback modeFast Forward/Reverse Search to play back a particular recorded video Slow Forward/ Reverse Playback Picture-by-picturePlay Back Recorded Video from a HDD of the mobile rack Search Full List Alarm List Time Search Thumbnail SD Card Search OperationsFull List Search Time Search Alarm list Search Thumbnail Search SD Card SearchMM DD Year 03 / 13 Mobile Rack HD Backup Operations Backup OperationsSet HD 2 to Backup first. Take the following steps F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG F0005.JPG Select Duplicate a particular recorded video from HD1 to HD2 Full Security Digital Card SD Card Backup Operations Disk Setting Reformat HD2 UsageSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Save the whole setting into the SD card For more detail Backup the System setting info into SD CardTransfer the system setting info of DVR to another Archive video of AVI Clips into SD Card Key Lock Operation Enter button Set Up Menu Navigation Buttons Setup button REC Quality REC Setting Alarm / Motion Setting ALM Type PRE- Alarm REC Schedule 0600-1600 1200-18000600-1800 0000-0000 Title Channel 1 2 3 Dwell 03 03 03 03 NET Enable NET Enable OFF NET Dhcp NET IP SET FTP Setting Main Comm Setting Comm ID Http Port FTP Setting1 S Account SET Main SET FTP on / OFF FTP Account FTP IP AccountUser Path HD 1 Backup HD HD2 Usage System Situation MAC 00 0c 0c 00 00 Bios Date Mar 10 Setup General Command FormatCommunication Protocol DEC HEX Value of a specific front panel keyRequest Time Second Category=0x02 Set Time Second Category=0x02 Non REC Mode REC ModeDVR Playback Error Request State Second Category=0x06 Built-in hard disk Jumper settings of hard-disk drives for the system Location Mobile Rack HDD Installation Page Page System Default SET RS232 / RS485 Disk Setting Reformat D. Message Meanings PIN no Network Viewer Install the Network Viewer for the ZIP file View the 4CH DVR video from a remote PC Page Function Buttons Description Page Set the regular record settings Change the Record & Timer Properties Via the NetworkSet the Alarm record settings Set the Record Schedule Archive Images to the Computer Image Viewer Point stops recording Previously recorded data remaining 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Cable Connections Physical specification of RJ-45 cable for EthernetConnect to a computer Connect to a LAN Hub Intranet Configure Your DVR Network Settings RJ-45 PIN configuration for LAN HubEnable DVR Network Function Connect to WAN Internet Set IP Address Enable Dhcp FunctionPage 12.3 TCP/IP Communication Software 12.4 TCP/IP installation Click Start Settings Control Panel Network 12.5 TCP/IP Configuration setting Click Start Programs Connection TestingPage Description of functional keys Connecting the 4CH DVR Browsing images from the 4CH DVR Page Change Record / Alarm Setting Change Timer Record Setting Change Pan/Tilt/Zoom Setting Page Model Number MV-DR4000 Design and specifications subject to change without notice Appendix 1. -SCANIP