AVE MV DR4000 manual NET Enable OFF NET Dhcp NET IP SET FTP Setting Main

5.4 COMMUNICATION

This option allows you to configure the Ethernet settings when connected to a LAN/WAN as well as RS-232/485 protocols if connected to an external control device.

MAIN MENU

RECORD

ALARM/ MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO COMM PAGE

COMM ID:

COMM SETTING

COMM ID	: 01
RS232	: ON
RS485	: ON
NET ENABLE	: OFF
NET DHCP	: OFF
NET IP	: SET

FTP SETTING

MAIN PAGE

SET RS232 / RS485 ID

Communication ID for RS232 and RS485 communication. After the 4CH DVR receives a RS232 or RS485 command, it checks if the <Dest ID> within the code is the same as the COMM ID, in which case the particular command can be accept.

RS-232:

The RS-232 communication port can be either in an importing or exporting mode according to your applications.

ON: Enables the RS-232 communication port. When you wish the unit to be controlled by an external device, please select this entry for use.

OFF: Disables the RS-232 communication port.

RS-485:

The RS-485 communication port can be either in an importing or exporting mode according to your applications.

ON: Enables the RS-485 communication port. When you wish the unit to be controlled by an external device, please select this entry for use.

OFF: Disables the RS-485 communication port.

NET ENABLE:

This option selects either enable or disable for the Ethernet communication port. OFF:Disables it.

ON: Enables it.

39