
Figure 3.3 A.
1+ 2: 59G | 12.4 HR |
QUALITY: BEST | NTSC |
RATE: 6 HR | 10 F/S |
| 9 K |
HD | P | SIZE | POS |
1 | Y | 20 G | 39.5% P |
2 | Y | 39 G | 0.0% R |
IP : 192 . 168 . 1 . 90
Description of Figure 3.3 A
(1+2: 59G): Total capacity of installed hard disks, 59 GB (in this example)
(12.4 HR): Total 12.4 hour recording time available
( | ): Timer record activated |
( | ): Alarm record activated |
(QUALITY: BEST): Record quality setting, BEST
(NTSC): NTSC system
(RATE: 6 HR): Setting of Record time mode, 6 hours
(10 F/S): Record speed setting, 10 frames/sec
( | ): Audio function activated |
|
( | ): Indicate which HDD is activated | |
(9K): The image file size |
| |
(HD): Hard disk Compartment |
| |
(P | ): Y Hard disk installed; . | No hard disk installed |
(SIZE 20G): The capacity of the installed hard disk | ||
(POS): Percentage of system; | R: Recording; P: Playback | |
(IP : 192 . 168 . 1 . 90): Setting of the Ethernet | ||
communication,192.168.1.90 |
| |
( | ): External signal |
|
(x): Disk unavailable
3.3.2 Channel Selection
The CH1, CH2, CH3, CH4, Quad (), and Seq./Save button are used to select the displayed video channels and zoom in factor. The following table shows the functions under different mode.
Mode | Key |
| Result Display |
Live / Record | Quad ( | ) |
|
| CH1/ CH2/ CH3/ CH4 | ( Single channel ) | |
| Seq./Save |
| then loop back |
Playback | Quad ( | ) |
|
| CH1/ CH2/ CH3/ CH4 | ( Single channel ) | |
| The same channel | single channel with 2x2 zoom in | |
| pressed the 2nd time |
|
13