Elmo L-1EX instruction manual Name Function, OSD Menu

English

		Name		Function
(1)		POWER		To turn the power
	(POWER ON/OFF			ON/OFF.
	standby status)			Power ON:
				Blue lamp
				Power OFF
				standby status:
				Red lamp
(2)	OSD		MENU	To show/hide the
	Procedure			OSD menu.
		P.19		The LEDs for op-
				eration buttons are
				not lit during OSD
				menu display.
				P.19
(3)				To select an OSD
				menu item.
			(Direction)
(4)				To decide the
				OSD item.
			(Decision)
(5)				To pause the
				camera image.
	(Pause)			Press this button
				again to unpause
				the video.
(6)				To save the im-
				age on the SD
	(Image save)			card.
				P.37

	Name		Function
(7)	Image		To switch the output
	select		image to images
		(SD mode)	stored on the SD
			card.
			The SD Mode LED
			is illuminated in SD
			Mode.	P.54
(8)			To switch the output
		(CAMERA)	image to camera
			image.
			The LED is illuminated
			when camera image is
			selected as the output
			image.	P.54
(9)			To switch the output
		(PC)	image to the image
			input to RGB IN.
			The LED is illumi-
			nated when RGB IN
			image is selected as
			the output image.
				P.54
(10)	Bright-		To brighten the
	ness		camera image.
	Adjust			P.53
(11)			To darken the
			camera image.
				P.53
(12)	SD		When SD single
	mode		is displayed, it
	operation		returns to the
			previous image.
			In 4 x 4 display, the
			cursor for selecting
			the image returns
			to the previous
			image.
(13)			When SD single is
			displayed, it moves to
			the following picture.
			When 4 x 4 is dis-
			played, the cursor for
			selecting the image
			moves to the follow-
			ing image.
(14)			Change between
			SD image single
			display and 4 x 4
			display.

PART NAMES AND FUNCTIONS

13