English
BEFORE YOU USE
nBe sure to use the power cord applicable to your local power specifications. If the product was sold in Japan, use the AC adapter sold with the product with 100 VAC and 50 or 60 Hz.
nWhen storing the product, do not leave it under direct sunlight or by heaters.
nIt may be discolored, deformed, or damaged.
nDo not place this product in any humid, dusty, salt bearing wind, or vibrating locations.
Use it under the following environmental conditions:
Temperature: | 0°C - 40°C (32°F - 104°F) |
Humidity: | 30% - 85% (No condensation) |
nUse a soft, dry cloth for cleaning.
Do not use any volatile solvent such as thinner or benzene.
nDo not point the camera lens directly at the sun. It may be damaged and you may not be able to take pictures.
nLuminescent and Black Spots
There may be some pixels that do not properly operate due to the use of CMOS Area Image Sensors
nFollow the guidelines below to prevent the unit from dropping or overturning.
•Use the product on a stable base, desk, or table. Do not place the product on an unstable base or slanted location.
•Place or wire the unit to prevent the AC adapter cord or video cable from pulling.
nCarry the product by holding the lower part of the main unit in both hands. Never hold the product by the column or the camera head.
