Fisher VPC-R1EX instruction manual For American Users

Page 2

Warning

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE

FOR AMERICAN USERS

œThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

œReorient or relocate the receiving antenna.

œIncrease the separation between the equipment and receiver.

œConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.

œConsult the dealer or an experienced radio/TV technician for help.

œChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

iEnglish

Page 1 Page 3
Image 2
Page 1 Page 3
Contents VPC-R1EX VPC-R1E VPC-R1 For American Users Declaration of Conformity Sanyo Fisher CompanyBefore Reading the Manual Regarding the data storage mediaSymbols used in this manual Contents Playback Applications Do not use while driving Using Your Digital Camera Safely and CorrectlyDo not modify or open the cabinet Do not use during a storm Be aware of your surroundings when using the digital cameraDo not get the digital camera wet Do not place on an unstable surfaceKeep the digital camera out of the reach of children Do not use where there is risk of explosionDo not use the flash close to a person’s face Concerning the Batteries Concerning the supplied alkaline batteriesGeneral precautions for the batteries Page Concerning the Accessories For correct use of your digital cameraWhen not using the digital camera for a long period Be careful of condensation under the following conditions If condensation seems likely to formPage Checking the Included Accessories Other separately sold devicesRear Part NamesFront Insert the batteries Installing the BatteriesClose the battery compartment cover To use other batteries Do not open battery cover while camera is turned onDo not use manganese batteries Installing the Card Installing the CardDo not remove the card when the camera is on To remove the cardOptions screen Reformatting a cardPress l to select Reformat Press j to select REFORMAT, and then press the SET button Reformatting with the main switch set to ÔTo cancel the Reformat operation Reformatting a memory card will erase all dataTurning the power Off Turning the Power ON/OFFTurning the power On When taking picturesTo protect your camera’s lens Turning the power on when the power save function is activeWhen in the playback mode, you can also Shooting Modes Shooting Still Images Press the shutter release buttonImportant points when capturing images Sequential Shots Sequential Shots Capture the picturesTake a video clip Set the shooting mode to the video clip shooting mode seeVideo Clips Playback Settings Screen Playback ModesPlayback Mode menu 100-0046 2001/06/15Playing Back Still Images Playing back still images one by oneWhen the 9-image display is shown in step Playing Back Sequential ShotsFrame-by-frame playback Set the playback mode to the video clip playback mode seePlaying Back Video Clips Fast playbackIs sound playback possible? Example of button operationIf the full-screen display appears in step Flash menu Shooting Settings ScreenSet the shooting mode see Press the Mode button Self-timer menu Resolution menuSequential shot mode menu To change the shooting mode in the Shooting Settings screenAdjusting the Image Quality Set the image resolution v x wTo exit the Shooting Settings screen, press the Mode button Changing the data size compression rate v Video clip shooting mode Press the shutter release button Still image shooting modeSequential shot shooting mode Macro indicator ¢ appears on the LCD Set the main switch to ÕSet the macro switch to £ If the main switch is set to Monitor OFFTake the picture To stop the self-timerTo cancel the self-timer mode Using the Flash If the shutter button does not work Press d or c on the arrow button to adjust the exposure Exposure Correction v x wShortcut for setting the exposure correction Zoom rate Press d or c on the arrow button to adjustShortcut for setting the zoom Select the still image playback mode see To stop the slide showMagnifying Zooming in the Image v x w Image Play back a sequential shot or video clip,YES Saves the displayed image as a still PROTECTING/ERASING Image Data Image data protectSelect YES, and press the SET button To continue setting the protect mode for other image dataTo cancel the protect mode for an image To erase still images Erase unneeded dataSelect the erase icon q Press the SET button To erase sequential shotsTo continue erasing other image data To erase video clipsIf Group Erase was selected Copying to the Card Using with a Computer Open the camera lens coverData formats Preserving the Recorded ImagesSaving images About video clip data recorded with the digital camera Directory configuration of recorded dataDo not modify card data using your computer Requesting Printing About the Dpof standard To clear the print settingsSelect STD PRINT, and press the SET button Select Clock SET, and press the SET button Setting the Date and TimeDisplay the Shooting Settings screen Set the date Set the timeSet the date display Select EXIT, and press the SET buttonCheck the clock after changing the batteries To correct the date and time settingIf the date and time are not set Select BEEP, and press the SET button Setting the Operation SoundSelect the beep sound setting, and press the SET button Hint Changing the Display Language Select LANGUAGE, and press the SET button Select the language, and press the SET buttonSelect any shooting or playback mode other than Ø Checking the Remaining Battery ChargeSet the main switch to Ô or Õ Battery indication Remaining chargeIf the LCD monitor suddenly turns off Set the main switch to Õ Open the lens cover Checking the Remaining Number of Images and Recording TimeTroubleshooting Problem Cause & SolutionTroubleshooting Shooting LCD monitor Problem Cause & SolutionViewing images Problem Cause & Solution Memory Other Specifications Digital CameraSecond delay Digital Camera Connectors Battery OperationPossible No. of Images/Possible Shooting Time One TotalCamera condition indicators Shooting mode displayPlayback mode display Icon Index

VPC-R1EX, VPC-R1, VPC-R1E specifications

The Fisher VPC-R1E, VPC-R1, and VPC-R1EX are advanced pressure regulators designed for precise control in various industrial applications. These units are celebrated for their robustness, reliability, and advanced features that meet the demands of process automation and control systems.

The VPC-R1E model is particularly notable for its electronic control capabilities. It integrates digital technology to allow for dynamic pressure regulation and monitoring. This model features a built-in pressure sensor and a user-friendly interface, enabling operators to adjust settings quickly and efficiently. The electronic control also contributes to improved accuracy, minimizing pressure fluctuation and ensuring a stable output.

On the other hand, the VPC-R1 is designed with a focus on mechanical simplicity paired with high performance. Its durable construction ensures reliability in harsh industrial environments. This model is equipped with a diaphragm sensing element that provides excellent responsiveness to pressure changes. The VPC-R1’s straightforward design allows for easy maintenance, making it an ideal choice for facilities looking for a dependable yet low-maintenance solution.

The VPC-R1EX variant extends the functionality of the VPC-R1 by enhancing its operational capabilities in potentially explosive environments. It is built with explosion-proof enclosures and complies with stringent safety regulations. This model is suitable for applications in oil and gas, chemical processing, and other industries where safety is paramount. The VPC-R1EX ensures that even in the most hazardous conditions, reliable pressure regulation is maintained without compromising safety.

All three models feature a compact design that allows for easy installation and integration into existing systems. They are compatible with a broad range of fluids, making them versatile for various applications. Features such as high-quality materials, exceptional sealing performance, and a wide operating temperature range further enhance their appeal.

In summary, the Fisher VPC-R1E, VPC-R1, and VPC-R1EX regulators represent cutting-edge solutions for pressure control in industrial settings. With advanced electronics, reliable mechanical performance, and safety features that cater to hazardous environments, these regulators are the preferred choice for engineers and procurement managers aiming for efficiency and safety in their operations. Each model caters to specific needs, offering the flexibility and reliability required in today's fast-paced industrial landscape.
Top Page Image Contents