Fisher VPC-R1EX instruction manual Checking the Remaining Number of Images and Recording Time

Page 76

CHECKING THE REMAINING NUMBER OF IMAGES AND RECORDING TIME

For information about the card’s and internal memory’s capacity, please see “Possible No. of Images/possible Shooting Time” on page 80.

œTo check the number of pictures or time remaining in the camera’s internal memory, do not insert a memory card.

1 Set the main switch to [Õ].

2 Open the lens cover.

œSelect any shooting mode other than [Ø].

œThe remaining number of images appears in the upper right of the LCD monitor (for the still image and sequential shot shooting modes).

œThe remaining video recording time appears in the upper right of the LCD monitor (for the video clip shooting mode).

œThe remaining number of images and video clips differs depending on the resolution and compression rate settings.

œWhen the indication for the remaining number of images or video clips becomes 0, no more images can be recorded. To record more images, either replace the card with another one, or save the recorded card data (see page 57) and then erase the card (see page 53).

<Still image shooting

mode>

18

<Sequential shot shooting mode>

18

<Video clip shooting

mode>

œEven when the indication for the remaining number of images or video clips becomes 0, in some cases further recording may be possible if you change the shooting mode, lower the resolution (see page 37), and/or increase the compression rate (see page 39).

1:05

71English

Page 75 Page 77
Image 76
Page 75 Page 77
Contents VPC-R1EX VPC-R1E VPC-R1 For American Users Declaration of Conformity Sanyo Fisher CompanyBefore Reading the Manual Regarding the data storage mediaSymbols used in this manual Contents Playback Applications Do not modify or open the cabinet Using Your Digital Camera Safely and CorrectlyDo not use while driving Be aware of your surroundings when using the digital camera Do not get the digital camera wetDo not use during a storm Do not place on an unstable surfaceDo not use the flash close to a person’s face Do not use where there is risk of explosionKeep the digital camera out of the reach of children Concerning the Batteries Concerning the supplied alkaline batteriesGeneral precautions for the batteries Page Concerning the Accessories For correct use of your digital cameraWhen not using the digital camera for a long period Be careful of condensation under the following conditions If condensation seems likely to formPage Checking the Included Accessories Other separately sold devicesFront Part NamesRear Close the battery compartment cover Installing the BatteriesInsert the batteries Do not use manganese batteries Do not open battery cover while camera is turned onTo use other batteries Installing the Card Installing the CardDo not remove the card when the camera is on To remove the cardPress l to select Reformat Reformatting a cardOptions screen Reformatting with the main switch set to Ô To cancel the Reformat operationPress j to select REFORMAT, and then press the SET button Reformatting a memory card will erase all dataTurning the Power ON/OFF Turning the power OnTurning the power Off When taking picturesWhen in the playback mode, you can also Turning the power on when the power save function is activeTo protect your camera’s lens Shooting Modes Shooting Still Images Press the shutter release buttonImportant points when capturing images Sequential Shots Sequential Shots Capture the picturesVideo Clips Set the shooting mode to the video clip shooting mode seeTake a video clip Playback Settings Screen Playback ModesPlayback Mode menu 100-0046 2001/06/15Playing Back Still Images Playing back still images one by oneWhen the 9-image display is shown in step Playing Back Sequential ShotsSet the playback mode to the video clip playback mode see Playing Back Video ClipsFrame-by-frame playback Fast playbackIf the full-screen display appears in step Example of button operationIs sound playback possible? Set the shooting mode see Press the Mode button Shooting Settings ScreenFlash menu Resolution menu Sequential shot mode menuSelf-timer menu To change the shooting mode in the Shooting Settings screenAdjusting the Image Quality Set the image resolution v x wTo exit the Shooting Settings screen, press the Mode button Changing the data size compression rate v Sequential shot shooting mode Press the shutter release button Still image shooting modeVideo clip shooting mode Set the main switch to Õ Set the macro switch to £Macro indicator ¢ appears on the LCD If the main switch is set to Monitor OFFTo cancel the self-timer mode To stop the self-timerTake the picture Using the Flash If the shutter button does not work Press d or c on the arrow button to adjust the exposure Exposure Correction v x wShortcut for setting the exposure correction Shortcut for setting the zoom Press d or c on the arrow button to adjustZoom rate Select the still image playback mode see To stop the slide showMagnifying Zooming in the Image v x w YES Saves the displayed image as a still Play back a sequential shot or video clip,Image PROTECTING/ERASING Image Data Image data protectTo cancel the protect mode for an image To continue setting the protect mode for other image dataSelect YES, and press the SET button Erase unneeded data Select the erase icon q Press the SET buttonTo erase still images To erase sequential shotsIf Group Erase was selected To erase video clipsTo continue erasing other image data Copying to the Card Using with a Computer Open the camera lens coverSaving images Preserving the Recorded ImagesData formats Do not modify card data using your computer Directory configuration of recorded dataAbout video clip data recorded with the digital camera Requesting Printing Select STD PRINT, and press the SET button To clear the print settingsAbout the Dpof standard Display the Shooting Settings screen Setting the Date and TimeSelect Clock SET, and press the SET button Set the date Set the timeSet the date display Select EXIT, and press the SET buttonIf the date and time are not set To correct the date and time settingCheck the clock after changing the batteries Select the beep sound setting, and press the SET button Setting the Operation SoundSelect BEEP, and press the SET button Hint Changing the Display Language Select LANGUAGE, and press the SET button Select the language, and press the SET buttonChecking the Remaining Battery Charge Set the main switch to Ô or ÕSelect any shooting or playback mode other than Ø Battery indication Remaining chargeIf the LCD monitor suddenly turns off Set the main switch to Õ Open the lens cover Checking the Remaining Number of Images and Recording TimeTroubleshooting Problem Cause & SolutionTroubleshooting Shooting LCD monitor Problem Cause & SolutionViewing images Problem Cause & Solution Memory Other Specifications Digital CameraSecond delay Digital Camera Connectors Battery OperationPossible No. of Images/Possible Shooting Time One TotalShooting mode display Playback mode displayCamera condition indicators Icon Index

VPC-R1EX, VPC-R1, VPC-R1E specifications

The Fisher VPC-R1E, VPC-R1, and VPC-R1EX are advanced pressure regulators designed for precise control in various industrial applications. These units are celebrated for their robustness, reliability, and advanced features that meet the demands of process automation and control systems.

The VPC-R1E model is particularly notable for its electronic control capabilities. It integrates digital technology to allow for dynamic pressure regulation and monitoring. This model features a built-in pressure sensor and a user-friendly interface, enabling operators to adjust settings quickly and efficiently. The electronic control also contributes to improved accuracy, minimizing pressure fluctuation and ensuring a stable output.

On the other hand, the VPC-R1 is designed with a focus on mechanical simplicity paired with high performance. Its durable construction ensures reliability in harsh industrial environments. This model is equipped with a diaphragm sensing element that provides excellent responsiveness to pressure changes. The VPC-R1’s straightforward design allows for easy maintenance, making it an ideal choice for facilities looking for a dependable yet low-maintenance solution.

The VPC-R1EX variant extends the functionality of the VPC-R1 by enhancing its operational capabilities in potentially explosive environments. It is built with explosion-proof enclosures and complies with stringent safety regulations. This model is suitable for applications in oil and gas, chemical processing, and other industries where safety is paramount. The VPC-R1EX ensures that even in the most hazardous conditions, reliable pressure regulation is maintained without compromising safety.

All three models feature a compact design that allows for easy installation and integration into existing systems. They are compatible with a broad range of fluids, making them versatile for various applications. Features such as high-quality materials, exceptional sealing performance, and a wide operating temperature range further enhance their appeal.

In summary, the Fisher VPC-R1E, VPC-R1, and VPC-R1EX regulators represent cutting-edge solutions for pressure control in industrial settings. With advanced electronics, reliable mechanical performance, and safety features that cater to hazardous environments, these regulators are the preferred choice for engineers and procurement managers aiming for efficiency and safety in their operations. Each model caters to specific needs, offering the flexibility and reliability required in today's fast-paced industrial landscape.
Top Page Image Contents