Fisher VPC-R1EX instruction manual Second delay

Page 83

Aperture

 

F2.8, F5.6 (automatic)

 

 

 

Exposure control type

Aperture and shutter programmable exposure

 

 

 

control

 

 

 

Exposure correction available from the Shooting

 

 

 

Setting Screen

Range

 

50 cm to infinity (normal photography),

 

 

 

20 cm to 50 cm (macro photography)

Digital zoom

For shooting

 

 

 

Resolution 4: 1x to 2.0x

 

 

 

Resolution 20: 1x to 4.0x

 

 

 

For playback

 

 

 

1x to 20x (varies with the resolution)

 

 

 

 

Shutter

 

Still image shooting mode: 1/4 to 1/500 sec. (Flash:

 

 

 

1/30 to 1/500 sec.) and Sequential shot video clip

 

 

 

shooting modes: 1/30 to 1/500 sec.

 

 

 

Sensitivity

Auto (equivalent to ISO20 to 100)

 

 

 

Viewfinder

Optical direct image viewfinder

LCD monitor

1.5 inch low temperature polysilicon TFT color

 

 

 

liquid crystal

LCD monitor pixels

Approx. 110,000 pixels

Flash working range

0.5m to 2.1m (normal shooting),

 

 

 

0.2m to 0.5m (macro shooting)

Flash modes

Auto-flash, forced flash, flash off, and red-eye

 

 

 

reduction

 

 

 

 

Focus

 

Pan focus

Self-timer

 

10-second delay

 

 

 

Time/date

Recorded with image data (automatic calendar

 

 

 

from 2000 to 2037)

Ambient

 

Temperature

0 to 40°C (operation), –20 to 60°C (storage)

environ-

 

 

 

 

Humidity

30 to 90% (operation, no condensation),

ment

 

 

10 to 90% (storage, no condensation)

 

 

 

 

English 78

Page 82 Page 84
Image 83
Page 82 Page 84
Contents VPC-R1EX VPC-R1E VPC-R1 For American Users Sanyo Fisher Company Declaration of ConformityRegarding the data storage media Before Reading the ManualSymbols used in this manual Contents Playback Applications Do not use while driving Using Your Digital Camera Safely and CorrectlyDo not modify or open the cabinet Do not place on an unstable surface Be aware of your surroundings when using the digital cameraDo not get the digital camera wet Do not use during a stormKeep the digital camera out of the reach of children Do not use where there is risk of explosionDo not use the flash close to a person’s face Concerning the supplied alkaline batteries Concerning the BatteriesGeneral precautions for the batteries Page For correct use of your digital camera Concerning the AccessoriesWhen not using the digital camera for a long period If condensation seems likely to form Be careful of condensation under the following conditionsPage Other separately sold devices Checking the Included AccessoriesRear Part NamesFront Insert the batteries Installing the BatteriesClose the battery compartment cover To use other batteries Do not open battery cover while camera is turned onDo not use manganese batteries Installing the Card Installing the CardTo remove the card Do not remove the card when the camera is onOptions screen Reformatting a cardPress l to select Reformat Reformatting a memory card will erase all data Reformatting with the main switch set to ÔTo cancel the Reformat operation Press j to select REFORMAT, and then press the SET buttonWhen taking pictures Turning the Power ON/OFFTurning the power On Turning the power OffTo protect your camera’s lens Turning the power on when the power save function is activeWhen in the playback mode, you can also Shooting Modes Press the shutter release button Shooting Still ImagesImportant points when capturing images Sequential Shots Capture the pictures Sequential ShotsTake a video clip Set the shooting mode to the video clip shooting mode seeVideo Clips Playback Modes Playback Settings Screen100-0046 2001/06/15 Playback Mode menuPlaying back still images one by one Playing Back Still ImagesPlaying Back Sequential Shots When the 9-image display is shown in stepFast playback Set the playback mode to the video clip playback mode seePlaying Back Video Clips Frame-by-frame playbackIs sound playback possible? Example of button operationIf the full-screen display appears in step Flash menu Shooting Settings ScreenSet the shooting mode see Press the Mode button To change the shooting mode in the Shooting Settings screen Resolution menuSequential shot mode menu Self-timer menuSet the image resolution v x w Adjusting the Image QualityTo exit the Shooting Settings screen, press the Mode button Changing the data size compression rate v Video clip shooting mode Press the shutter release button Still image shooting modeSequential shot shooting mode If the main switch is set to Monitor OFF Set the main switch to ÕSet the macro switch to £ Macro indicator ¢ appears on the LCDTake the picture To stop the self-timerTo cancel the self-timer mode Using the Flash If the shutter button does not work Exposure Correction v x w Press d or c on the arrow button to adjust the exposureShortcut for setting the exposure correction Zoom rate Press d or c on the arrow button to adjustShortcut for setting the zoom To stop the slide show Select the still image playback mode seeMagnifying Zooming in the Image v x w Image Play back a sequential shot or video clip,YES Saves the displayed image as a still Image data protect PROTECTING/ERASING Image DataSelect YES, and press the SET button To continue setting the protect mode for other image dataTo cancel the protect mode for an image To erase sequential shots Erase unneeded dataSelect the erase icon q Press the SET button To erase still imagesTo continue erasing other image data To erase video clipsIf Group Erase was selected Copying to the Card Open the camera lens cover Using with a ComputerData formats Preserving the Recorded ImagesSaving images About video clip data recorded with the digital camera Directory configuration of recorded dataDo not modify card data using your computer Requesting Printing About the Dpof standard To clear the print settingsSelect STD PRINT, and press the SET button Select Clock SET, and press the SET button Setting the Date and TimeDisplay the Shooting Settings screen Set the time Set the dateSelect EXIT, and press the SET button Set the date displayCheck the clock after changing the batteries To correct the date and time settingIf the date and time are not set Select BEEP, and press the SET button Setting the Operation SoundSelect the beep sound setting, and press the SET button Hint Changing the Display Language Select the language, and press the SET button Select LANGUAGE, and press the SET buttonBattery indication Remaining charge Checking the Remaining Battery ChargeSet the main switch to Ô or Õ Select any shooting or playback mode other than ØIf the LCD monitor suddenly turns off Checking the Remaining Number of Images and Recording Time Set the main switch to Õ Open the lens coverProblem Cause & Solution TroubleshootingShooting LCD monitor Problem Cause & Solution TroubleshootingViewing images Problem Cause & Solution Memory Other Digital Camera SpecificationsSecond delay Battery Operation Digital Camera ConnectorsOne Total Possible No. of Images/Possible Shooting TimeIcon Index Shooting mode displayPlayback mode display Camera condition indicators

VPC-R1EX, VPC-R1, VPC-R1E specifications

The Fisher VPC-R1E, VPC-R1, and VPC-R1EX are advanced pressure regulators designed for precise control in various industrial applications. These units are celebrated for their robustness, reliability, and advanced features that meet the demands of process automation and control systems.

The VPC-R1E model is particularly notable for its electronic control capabilities. It integrates digital technology to allow for dynamic pressure regulation and monitoring. This model features a built-in pressure sensor and a user-friendly interface, enabling operators to adjust settings quickly and efficiently. The electronic control also contributes to improved accuracy, minimizing pressure fluctuation and ensuring a stable output.

On the other hand, the VPC-R1 is designed with a focus on mechanical simplicity paired with high performance. Its durable construction ensures reliability in harsh industrial environments. This model is equipped with a diaphragm sensing element that provides excellent responsiveness to pressure changes. The VPC-R1’s straightforward design allows for easy maintenance, making it an ideal choice for facilities looking for a dependable yet low-maintenance solution.

The VPC-R1EX variant extends the functionality of the VPC-R1 by enhancing its operational capabilities in potentially explosive environments. It is built with explosion-proof enclosures and complies with stringent safety regulations. This model is suitable for applications in oil and gas, chemical processing, and other industries where safety is paramount. The VPC-R1EX ensures that even in the most hazardous conditions, reliable pressure regulation is maintained without compromising safety.

All three models feature a compact design that allows for easy installation and integration into existing systems. They are compatible with a broad range of fluids, making them versatile for various applications. Features such as high-quality materials, exceptional sealing performance, and a wide operating temperature range further enhance their appeal.

In summary, the Fisher VPC-R1E, VPC-R1, and VPC-R1EX regulators represent cutting-edge solutions for pressure control in industrial settings. With advanced electronics, reliable mechanical performance, and safety features that cater to hazardous environments, these regulators are the preferred choice for engineers and procurement managers aiming for efficiency and safety in their operations. Each model caters to specific needs, offering the flexibility and reliability required in today's fast-paced industrial landscape.
Top Page Image Contents